3Com 3C971-F manual Do one of the following, 15Prompt for Additional Channels

Configuring Network Channels 4-13

Figure 4-15Prompt for Additional Channels

10 Do one of the following:

■Select No to exit the configuration procedure, and go to the next section (“Editing the AUTOEXEC.NCF File”) to continue the installation.

■Select Yes to configure an additional channel. The maximum is four channels (Channel 1 plus three additional channels).

The dialog box in Figure 4-16 appears.

Figure 4-16Reselect the Driver for Additional Channels

The dialog box in Figure 4-16 is the same dialog box as shown in Figure 4-6. However, this time the driver is obtained from the NetWare server’s hard disk instead of the installation diskette. Each channel requires the installation and configuration of a 3C971-F adapter driver.

11Select the 3C971FSI.LAN in the driver selection dialog box shown in Figure 4-16.