Windows NT Driver, Installation, Overview | 3Com 3C971-F specs

3	WINDOWS NT DRIVER
	WINDOWS NT DRIVER
	INSTALLATION

Overview

This chapter describes the procedure for installing a 3C971-F ATMLink PCI adapter driver for Microsoft¨ Windows NT™ 3.51 workstations. The 3C971-F adapter driver provides standards-based ATM LAN emulation connectivity to an ATM network. This allows you to run legacy LAN applications, Ethernet networking technologies and Ethernet protocols over an ATM network.

The LAN emulation SVC driver utilizes signaling software to establish connections between two end stations on the ATM network. The driver operates below the host’s Link Level protocol. It provides for broadcast/multicast addressing, along with other LAN-like services, so that host network protocols function as if they were talking to a real MAC layer of an Ethernet interface. Connections are set up and torn down dynamically by the signaling software provided with the 3C971-F adapter. Once the LAN emulation server (LES) has been set up on the ATM network, it is easy to add a LAN emulation client (LEC) to the network.

CAUTION: Your ATM switch must be set to support the UNI 3.0 standard for switched virtual circuits.

Multiple LAN Emulation Clients

The 3C971-F adapter can communicate with up to four LAN emulation servers (LESs) at a time. During installation of the hardware driver, four client

Image 23

3Com 3C971-F manual Windows NT Driver, Installation, Overview

Contents

Network Adapter User Guide PCI 155 Fiber Lifetime Warranty Sweden, Finland, Norway 3C971-F Atmlink PCI 155 Fiber 3Com Corporation 5400 Bayfront Plaza Santa Clara, California Contents Troubleshooting Page Figures Prompt for Additional Channels Introduction How to Use This GuideAbout this Guide Text Description Conventions 3C971-F ATMLink PCI Adapter Introduction Product Features PCI Technology 3C971-F Adapter Installation KitSoftware Drivers Introduction Tools Required Hardware InstallationInstallation Overview Save the screw for later in this section Installing the 3C971-F Adapter Installing the 3C971-F Adapter Press down gently and ﬁrmly on the board to seat it properly 3SC Duplex Connection Turn on the power to the computer Overview InstallationWindows NT Driver Installation Procedures Overview System Requirements Installing the Adapter Device Driver Select the Add Adapter button. The dialog box in -2 appears 1Network Settings Screen 3Selecting the Floppy Drive Insert the device driver diskette in a ﬂoppy disk drive Select the OK button If needed, change the drive designation Edit the PCI adapter parameters 6Conﬁguring the Signaling Transport Edit the signaling transport items 7Completed Network Settings Edit the TCP/IP parameters Select the OK button on the Network Settings screen Windows NT Driver Installation Installing the Adapter Device Driver Conﬁguring the LAN Emulation Clients LECs Select OK when the TCP/IP Conﬁguration is completeSelect Restart Now to reboot the computer 10LEC Conﬁguration Set the value in the Interrupt list box Elan Name blank Select the Conﬁgure button 11LEC ATM Adapter Conﬁguration Edit the LEC ATM Adapter items Windows NT Driver Installation Select the OK button to exit the LEC Conﬁguration dialog box When all clients are conﬁgured, select the OK button 12LECS/LES Reboot Prompt Select OK Exit Windows NT and reboot the computer Select the Remove button Removing a Windows NT DriverSelect the Control Panel icon from the Main group 14Conﬁrming Adapter and Driver Removal Select the Restart Now button to reboot the computer Click the OK button in the Network Settings screen Netware 4.1 Server Driver Installation Loading the Novell NetWare Server Driver Select Driver options 3Select Additional Driver Press Insert to install an unlisted driver 5Notes for Selecting a Drive Insert the 3Com 3C971-F driver diskette in a ﬂoppy drive Select Yes to copy the driver ﬁles to the server Conﬁguring Network ChannelsPress Enter to select the driver Configuring Network Channels 9Conﬁguring TCP/IP Network Interface 10Change IPX Frame Type Edit Channel number Enter the LECS/LES network address Enter Elan Name Configuring Network Channels Press Enter to accept the assigned number Select Save parameters and load driver 15Prompt for Additional Channels Do one of the following 17Selecting the NCF Files Editor Editing the AUTOEXEC.NCF File Removing a Driver from NetWare From the system prompt, enter the command Select NCF ﬁles options Startup Problems Troubleshooting Applications Problems Bootup Problems Adapter Problems Bus Interface SpecificationsHardware Memory Standards Compliance Network Connections Range Environment Access by Modem On-line Technical Services Call the telephone number nearest you Access by Isdn Press Return to see the 3ComForum main menu Log on to CompuServe Support from Your Network Supplier Country Telephone Number Fax Number Returning Products for Repair ATM Forum Glossary Cell Call setupCall control Header Cell switchingConnectionless ATM End system Mbps Ilmi Node Packet switchingMulticast Multimode Signaling Service bit rate Virtual path Token ringVirtual circuit virtual channel VPI Numerics Index LEC Limited Warranty 3Com Corporation FCC Class a Verification Statement Reader Comment Form 3Com Corporation Business Reply Mail