3Com 3C971-F Select Save parameters and load driver, Press Enter to accept the assigned number

4-12 CHAPTER 4: NETWARE 4.1 SERVER DRIVER INSTALLATION

dGo to step 7.

■If you want the client to bypass the LECS at bootup and contact the LES directly, do the following:

aSelect LES Network Prefixand enter the first thirteen bytes (26 characters) of the LES’s ATM network address.

bSelect LES ESI/SEL and enter the remaining seven bytes (14 characters) of the ATM network address.

cSet the LECS Network Prefix and the LECS ESI/SEL parameters to zero, if they are not set to zero already.

7When configuration of the Parameters box is complete, press [Esc] to move the highlight bar to the bottom box.

8Select Save parameters and load driver.

A random network number, similar to the one shown in Figure 4-14, is assigned to the new channel.

Figure 4-14Setting the Network Number

9Press [Enter] to accept the assigned number.

The dialog box shown in Figure 4-15 appears, asking whether you want to load the driver again and configure another channel for the 3C971-F adapter.