Configuring the LAN Emulation Clients (LECs) 3-15

To configure the LAN emulation clients, follow these steps:

1Boot the computer under Windows NT.

2Log into your Windows NT Administrator account.

3At the Program Manager screen, select the Control Panel icon.

4Select the Lecconf icon (shown at left) in the Control Panel.

The dialog box in Figure 3-10 appears.

Figure 3-10LEC Configuration

The LECCONF icon was inserted in the Windows NT Control Panel during the installation of the hardware driver in the previous section.

The ATM Adapter Interfaces box lists the ATM adapter(s) installed in your computer. The example in Figure 3-10 shows a 3C971-F adapter as ATM Adapter 0 with a MAC address of 00:00:77:85:8b:4e.

5Set the value in the Interrupt list box.

Select the same setting used in the PCI setup routines of step 13 in the section “Installing the

Page 37
Image 37
3Com 3C971-F manual Set the value in the Interrupt list box, 10LEC Configuration