Installing the Adapter Device Driver

3-9

Figure 3-6Configuring the Signaling Transport

This dialog box is accessible to the user in the Network Settings screen as a separate line item within the Installed Network Software list box. Refer to Figure 3-7.

15 Edit the signaling transport items.

aSet debugAPI to OFF (default).

The debug option is used as a troubleshooting aid for the 3C971-F adapter. If you experience difficulty in establishing connections with other nodes in the network, setting the debug option to ON produces special messages from the driver to assist in isolating the problem.

bSet RegisterLecs to ON (default).

In future implementations that support the LAN emulation server (LES), this item enables or disables whether the “well-known” address of the LAN emulation configuration server (LECS) is registered or not. As of this release of the adapter, the setting has no effect upon the adapter or the operation of the LAN emulation clients.

cSet UniRev to UNI30 (default) or to UNI31.

This item identifies the UNI level of the signaling software driver being installed. The UNI30 setting specifies UNI version 3.0. If your ATM switch supports UNI version 3.1, use UNI31 as the entry.

Page 31
Image 31
3Com 3C971-F manual Edit the signaling transport items, 6Configuring the Signaling Transport