Adapter Problems |
Adapter Problems
Problem | Possible Solution |
Host adapter is | The PCI system in your computer is supposed |
not found. | to configure the bus address locations |
| automatically. An address conflict is probably |
| not the problem. If the driver is correctly |
| installed, a driver message should appear in |
| the system driver event log after bootup of your |
| computer. |
| 1 Make sure the adapter card is seated |
| correctly in the bus expansion slot. Try |
| another PCI slot. Try another adapter that is |
| known to operate correctly. |
| 2 Check for correct configurations of the |
| network cable into the adapter card. Verify |
| the cable is properly connected at both |
| ends. If the cable is connected correctly, the |
| Link LED will be on. |
| 3 Ping the failed system from another host on |
| the network. |
| 4 Reseat the adapter card. |
The card cannot communicate with other hosts on the network.
1 Check the network cable and all connections.
2 Try to ping other hosts on the network from your host computer.
