Installing the Adapter Device Driver | 3-11 |
■3C971-F ATMLink Adapter Client 3
17Select the OK button on the Network Settings screen.
The TCP/IP Configuration screen for editing the network interface appears, as shown in Figure 3-8.
Figure 3-8TCP/IP Configuration with Sample Entries
18Edit the TCP/IP parameters.
At this stage of the installation, only Client 0 is enabled. Client 0 represents the true MAC address of the 3C971-F adapter and must be configured to your network before exiting the screen. The same is true for any of the remaining clients that will be enabled in the LEC configuration section later in this chapter. If any of the clients are to remain disabled, only the IP Address box need be completed. You cannot exit the TCP/IP screen unless an IP address entry exists for all four clients. If applicable, dummy numbers can be loaded to the clients that will remain
