4-16 CHAPTER 4: NETWARE 4.1 SERVER DRIVER INSTALLATION

Figure 4-18Selecting the NCF Files Editor

2Select NCF files options.

This opens the AUTOEXEC.NCF file for editing.

3Remove the LOAD and BIND commands for each channel of the 3C971-F adapter by deleting all lines similar to the following:

load 3C971FSI.lan FRAME=Ethernet_802.2 Name=3C971FSI_1

bind ipx 3C971FSI_1 net=random_8_digits

load asig

4Save and exit the AUTOEXEC.NCF file.

5Exit the NetWare INSTALL utility.

CAUTION: Do not attempt to reinstall the 3C971-F adapter drivers before rebooting the server.

6 Reboot the server.

Page 61
Image 61
3Com 3C971-F manual Select NCF files options