1#.
-!
dIn the QMS
magicolor
2 DeskLaser Properties dialog box, choose the Details
tab (Windows 95/98) or the Scheduling tab (Windows NT 4.0).
e Choose the Spool Settings... button.
f In the Spool Settings dialog box change the Spool Data Format to
QMJOURNAL or select Print Directly to the Printer.
g Choose Enable bidirectional support for this printer.
h Choose OK twice to return to the Printers dialog box, and then close the
Printers dialog box.
4 Change the spooling time.
If changing the printer driver spool setting to QMJOURNAL doesn’t work , try the
following:
In the Spool Print Jobs So Program Finishes Printing Faster section of the dialog
box, choose the radio button for Start Printing After Last Page Is Spooled rather
than Start Printing After First Page Is Spooled.
5 Add more memory to the printer.
See “Single In-line Memory Modules (SIMMs)” in chapter 5, “Pr inter Options,” for
a discussion of how the PC and printer use memory and for information on install-
ing SIMMs.
6 Reboot your printer.
;
;;
;






+
++
+











.
..
.

If you’re not using TrueType fonts, change to TrueType fonts.
;
;;
;

<
<<
<






���








1 Check that the media does not exceed the media limit mark.
Make sure that the stack does not exceed the paper limit mark on the media
cassette.
2 Check that the paper stack is correctly aligned.
Make sure that the stack is correctly aligned in the media cassette.