QMS 1800486-001C, QMS magicolor 2 DeskLaser manual Need new kernel

￿￿￿￿￿￿￿￿￿￿￿￿￿￿&￿￿￿￿

￿￿￿￿￿$￿￿

This message...	indicates...	Do this...
Need new kernel	The kernel can’t be located by the	Download the kernel
	system software.	again.
New kernel...	The kernel is being downloaded	No action needed.
	during the system software
	downloading process.
Output Bin Full	Media has filled up the output bin.	Remove media from the
		output bin.
Outer jam	Media has jammed leaving the paper	Locate and remove the
	exit unit.	jam.
Paper out lower Tray	The indicated media cassette is empty	Reload the cassette.
Paper out upper Tray	or the cassette is missing.
	» Note: Because the system code is
	not updated until after the print job
	finishes, this message may at
	times seem incorrect. In other
	words, if you print a job from the
	lower cassette, then start printing
	a job from upper cassette but run
	out of media in the upper cassette
	before the job finishes, the
	message Paper out lower
	Tray displays.
Printing	The printer is on line and printing.	No action needed.
Printing need	The printer is on line and printing, but	Add more memory, and
More memory	it needs more memory to print the file.	then reprint the job.
	It will print as much of the page as it
	can currently fit in memory.
	» Note: Due to the lack of sufficient
	memory, parts of the image may
	be clipped off.

-￿/ ￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿