6&$
;
0-
8 Remove the jammed media by
pulling it from the bottom of the
fuser (through the printer’s [and/or
the duplexer’s] rear cover), not
from the top of the fuser.
This prevents any unfused tone r from
dirtying the fuser rollers.
Caution:
Be careful not to touch the
transfer drum while removing
jammed media.
9 Close the fuser roller pressure release levers (one at each end of the fuser).
10 Close the top cover of the printer.
11 Close the rear cover of the printer.
12 Slide the cassette(s) back into the printer.