QMS 1800486-001C, QMS magicolor 2 DeskLaser manual This item needs After Cleaning

￿￿￿￿￿￿￿￿￿￿￿￿

￿￿￿￿￿￿￿￿

￿￿￿￿￿￿￿￿￿￿￿+￿￿￿￿￿￿￿

The stated life expectancy of each consumable is based on printing under specific operating conditions, such as media type, number of color planes, page size, and page coverage (usually 5% coverage of letter/A4-size media).

The actual life expectancy will vary depending on these and other printing variables, including continuous or intermittent printing, ambient temperature, and humidity.

»Note: A plane is a single pass of the OPC belt (one toner color). For example, a one-color print job makes one pass (one plane), and a two-color print job makes two passes (two planes). A single-sided (simplex) page (also called a face) usually consists of four passes of the OPC belt, since most color print jobs use all four toner colors. A 2-sided (duplex) page usually consists of eight passes of the OPC belt, since most color print jobs use all four toner colors.

Consumable life is expressed in simplex pages (1 face). A duplex page (2 faces) is the equivalent of two simplex pages.

￿￿￿￿￿￿￿￿￿￿.￿￿￿￿￿￿

Every 20,000 single-sided pages, a thorough cleaning should be performed by the user.

This item needs	After...	By...
cleaning...
Corona wire (also known	Every 20,000 pages or 12 months	User
as the OPC charge wire)	(whichever comes earlier.)	See step 7 in “Cleaning the
		OPC Belt Cartridge” on page
		6-16.
If you have the duplex	Every 20,000 pages, or 12 months,	User
model, the duplex unit	whichever comes earlier.	See “Cleaning the Duplexer”
paper guides
		on page 6-24.
If you have the duplex	Every 20,000 pages, or 12 months,	User
model, the duplex unit	whichever comes earlier.	See “Cleaning the Duplexer”
roller
		on page 6-24.
Laser lens	Only when you find vertical white or	User
	light-colored streaking in all	See “Cleaning the Laser
	primary colors on your printouts.
		Lens” on page 6-21.

/￿!￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿