6&*
#=
6#$. +
(#45
»Note:
If you have a duplex model, the lower input feeder should not be removed. Skip
to “Repack the Printer” on page 9-14.
If you don’t have a lower input feeder installed, skip to “Repack the Printer” on page
9-14.
1 Remove the plastic side covers from
the sides of the input feeder.
»Note:
The illustrations for steps 1
through 5 show the printer without the
duplexer.
Do not use these instructions for
the duplex model, since the lower
input feeder will remain installed.
2 Locate the cable at the left rear of
the optional feeder that connects it
to the printer, and then unplug it.
3 Switch the lower input feeder cover
plate and the printer cover plate
back to their original position.