&
$
$ -0Printing
Paper mismatch The media size in the media cassette
is different from that chosen in the
printer driver.
»Note:
The job will print on the
installed media size. However, if
the installed media size is smaller
than that chosen in the printer
driver, parts of the image may be
clipped.
Put the correct size
media in the cassette,
and then reprint the job.
QMS magicolor 2
Board test The printer is going through its initial
testing during startup. No action needed.
Replace 120K kit The printer is ready for its 120,000
page preventive maintenance. Call for service.
Replace belt The OPC belt cartridge needs to be
replaced. Replace the OPC belt
cartridge.
»Note:
Reset the
OPC belt under
Operator Control/
Consumables/Item
Replaced/Belt.
Replace black Toner The black toner cartridge is low. Replace the black toner
cartridge, or continue
printing until Black
toner Empty displays.
»Note:
Reset black
toner under
Operator Control/
Consumables/Item
Replaced/Black
Toner.
This message... indicates... Do this...