QMS QMS magicolor 2 DeskLaser, 1800486-001C manual

.￿￿￿￿￿￿$￿￿￿￿7￿￿￿￿

￿￿￿￿￿￿8￿￿#￿￿9￿

.￿￿￿￿￿￿$:

7Close the printer’s front cover.

8Check the status message in the message window.

If it reads x toner Empty, use the Service/Clear care menu to remove it.

"￿￿￿￿￿￿￿￿￿￿￿/￿￿￿￿'￿￿￿￿￿0￿￿￿￿￿1￿

"￿￿￿￿￿￿￿2

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

While the basic QMS magicolor 2 DeskLaser does not have a duplexing option, you can duplex print manually: Print on one side of the paper, remove any curl from the printed sheet(s), reinsert the printed sheet(s) into the media cassette (blank side up and the top of the page toward the back of the printer), and then print the second side.

»Note: Paper jams may occur if the printed sheet(s) reinserted in the media cassette are not entirely flat.

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

Duplex printing can be done automatically with the duplex model printer. There is no need to manually reinsert the paper.

Duplexing is supported for standard media up to 28 lb bond (105 g/m2). The duplexing options are Flip on Long Edge (prints flipped horizontally as in a loose-leaf notebook) or Flip on Short Edge (prints flipped vertically as on a clipboard), and are only avail- able when Standard is the Paper Type.

In the printer driver (Paper tab, Duplex Options), select Flip on Long Edge or Flip on Short Edge.

»Note: Consumable life is expressed in simplex pages (1 face). A duplex page (2 faces) is equivalent to two simplex pages.

.￿￿￿￿￿￿$ ￿￿