»Note:
If you’re returning the printer for service, you don’t need to return the power
cable, interface cables, or media cassette(s).
1 Turn off the printer.
2 Remove the power cable and all interface cables.
»Note:
In compliance with UL guidelines, “The appliance inlet is considered to be
the main disconnect device.”
3 Remove the media cassette(s) from the printer.
Caution:
The OPC belt is extremely sensitive to bright light and direct sunlight. Limit
exposure to less than two minutes or permanent damage could result. While the
printer is being moved, store the cartridge in its or iginal shipping bag. If you don’t have
this bag, carefully wrap it in a piece of dark, heavy cloth, and place it where it wi ll not
get scratched or damaged. If exposure exceeds two minutes, put the cartridge in a
dark place to recover before using it again. Depending on exposure, recovery may
take up to two hours. Recovery time is dependent on the amount of exposure
sustained, and recovery is not guaranteed.
Also, handle the OPC belt cartridge carefully. The belt is extremely sensitive to body
oils, moisture, solvents, corrosives, dust, and scratches, all of which will reduce print
quality.
1 Open the printer’s front cover.
2 Remove the four toner cartridges, attach the protective shields over their
magnetic rollers, and repackage them in their original packaging.