QMS 1800486-001C, QMS magicolor 2 DeskLaser manual Input, Type, Weight, Print Mode

￿￿￿￿￿￿￿￿￿￿￿￿

￿￿￿￿￿￿￿￿￿￿￿￿

This chapter describes how to refill the media cassette, print on different types

of media, prevent media jams, and cancel a print job, as well as how to replace a toner cartridge.

Two types of media cassettes are available for the magicolor 2 DeskLaser: the standard letter/A4 cassette and the optional universal cassette. Both cassettes work in either the upper or lower input feeder location. In addition, the printer pro- cesses media in one of three modes—Standard [Plain Paper], Thick Stock, and Trans- parency—to adjust for the fusing rate for envelopes, labels, glossy stock, thick stock, transfer media, and transparency media.

,￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

This section discusses loading the media cassette with paper. If you’re using another type of media, refer to “Using Media Other than Plain Paper” on page 3-6 for information.

￿￿￿￿￿￿￿￿￿.￿￿￿.￿￿￿￿￿￿

Input	Cassette		Letter/A4 or universal
	Location		Upper input feeder or optional lower input feeder for standard
			(plain paper) media
	Capacity		250 sheets of 20 lb (75 g/m2) paper; capacity for other weights
			varies accordingly
Type	￿ Any standard or recycled office paper suitable for plain-paper laser print-
	ers, such as
	–	Xerox 4024
	–	Hammermill Laser Print
	￿ Letterhead/memo paper
Weight	￿ Long-grain plain paper, 16–24 lb bond (60–90 g/m2)
Print Mode	￿ Standard (Plain Paper)

￿￿ ￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿