3.Check the power cord for:

a.A third-wire ground connector in good condition. Use a meter to measure third-wire ground continuity for 0.1 ohm or less between the external ground pin and frame ground.

b.The power cord should be the appropriate type as specified in the parts listings.

c.Insulation must not be frayed or worn.

4.Remove the cover.

5.Check for any obvious non-IBM alterations. Use good judgment as to the safety of any non-IBM alterations.

6.Check inside the unit for any obvious unsafe conditions, such as metal filings, contamination, water or other liquids, or signs of fire or smoke damage.

7.Check for worn, frayed, or pinched cables.

8.Check that the power-supply cover fasteners (screws or rivets) have not been removed or tampered with.

Handling electrostatic discharge-sensitive devices

Any computer part containing transistors or integrated circuits (ICs) should be considered sensitive to electrostatic discharge (ESD). ESD damage can occur when there is a difference in charge between objects. Protect against ESD damage by equalizing the charge so that the machine, the part, the work mat, and the person handling the part are all at the same charge.

Notes:

1.Use product-specific ESD procedures when they exceed the requirements noted here.

2.Make sure that the ESD protective devices you use have been certified (ISO 9000) as fully effective.

When handling ESD-sensitive parts:

Keep the parts in protective packages until they are inserted into the product.

Avoid contact with other people.

Wear a grounded wrist strap against your skin to eliminate static on your body.

Prevent the part from touching your clothing. Most clothing is insulative and retains a charge even when you are wearing a wrist strap.

Use the black side of a grounded work mat to provide a static-free work surface. The mat is especially useful when handling ESD-sensitive devices.

Select a grounding system, such as those listed below, to provide protection that meets the specific service requirement.

Note: The use of a grounding system is desirable but not required to protect against ESD damage.

Attach the ESD ground clip to any frame ground, ground braid, or green-wire ground.

Use an ESD common ground or reference point when working on a double- insulated or battery-operated system. You can use coax or connector-outside shells on these systems.

Use the round ground-prong of the ac plug on ac-operated computers.

110 Hardware Maintenance Manual: xSeries 330

Page 118
Image 118
IBM xSeries 330 manual Handling electrostatic discharge-sensitive devices

xSeries 330 specifications

The IBM xSeries 330 is a versatile and reliable server designed to meet the demands of small to medium-sized businesses and enterprise environments. This server model, part of IBM’s xSeries line, is known for its solid performance, expandability, and robust features.

One of the main highlights of the xSeries 330 is its scalability. The server supports multiple configurations, with options for single or dual Intel Pentium III processors, allowing it to handle various workloads efficiently. It can accommodate up to 8GB of RAM, which is essential for running memory-intensive applications smoothly. This capacity ensures that businesses can upgrade their systems rather than replace them, providing a cost-effective solution for managing growing data needs.

In terms of storage, the xSeries 330 offers flexible options with up to six hot-swap hard drives. This feature enhances the server's uptime, as drives can be replaced without shutting down the system. The server supports RAID configurations, including RAID 0, 1, and 5, enhancing data protection and performance.

Connectivity is another critical aspect of the xSeries 330. It comes equipped with multiple PCI slots, allowing for the addition of various expansion cards to improve functionality, such as network controllers, graphics cards, and storage controllers. The server also provides integrated network management tools, which enable efficient monitoring and comprehensive troubleshooting, reducing downtime and maintenance efforts.

The xSeries 330 is supported by IBM's advanced management technologies, including the IBM Director. This software simplifies remote management, enabling IT personnel to monitor system health, perform updates, and automate tasks without the need to be physically present at the server location. Additionally, the server includes features like Automatic Server Restart and Predictive Failure Analysis, which help to predict and prevent potential hardware failures.

The design of the xSeries 330 emphasizes ease of use, with tool-less access to components, making upgrades and maintenance straightforward. Its compact form factor ensures that it can fit into diverse server environments, from traditional server rooms to modern data centers.

In summary, the IBM xSeries 330 stands out for its powerful performance, scalability, and management capabilities. These features make it a valuable asset for businesses looking to enhance their operational efficiency and prepare for future growth. With its reliability and versatile architecture, the xSeries 330 continues to be a respected choice among IT professionals.