Installing an adapter
Complete the following steps to install an adapter:
Attention: When you handle electrostatic discharge (ESD) sensitive devices, take precautions to avoid damage from static electricity. For details on handling these devices, refer to “Handling electrostatic
1.Review the safety precautions that are listed in “Chapter 9. Related service information,” on page 107.
2.Turn off the server and peripheral devices and disconnect all external cables and power cords.
3.Remove the server from the rack; then, remove the cover as shown. For more information see “Removing the cover” on page 44.
Cover release
leverScrews
4.Remove the expansion slot clip that holds the expansion slot cover in place by sliding it upward and off the frame of the server.
Note: The illustrations in this document might differ slightly from your hardware.
