3
46

Status6 Menu

Press the 56 buttons until the STATUS6 menu appears. This screen displays the
DSR-6000’s Memory (free memory), Flash memory, and Hard Drive memory.
Memory Field
This status-only field displays the amount of free volatile memory in MB units that
is available for use by the operating system.
Flash Field
This status-only field displays the amount of free non-volatile memory in MB units
that is available for use by the operating system.
Hard Drive Field
This status-only field displays the amount of free disk memory in GB units that is
available for use by the operating system.
Diagnostics Menus
Use the DSR-6000's diagnostic menu to get additional information for
troubleshooting. The menus also enable the user to test waveforms and use other
diagnostic information displayed on an NTSC television monitor connected
through the rear panel video output.
Caution: Turning on diagnostics changes the video or audio output, and these
diagnostic screens or tones may be transmitted to the cable customers if the
decoder is connected to the cable plant.
Press the 56 buttons until the DIAG menu appears.
E 7.7MB 100.3MB 59.6GB
STATUS6 Memor y Flash Hard Drive
E Off 0
DIAG Menus KS