41
GigE Subnet Mask Menu Default: 255.255.255.000
Use the following procedure to set and view the GigE Subnet Mask for the right
Ethernet port on the back panel of the DSR-6000. Press the 56 buttons until the
GigE Subnet Mask menu appears. The GigE subnet mask is represented in the
common dotted-decimal format. Contact the network administrator for details
about configuring the GigE port for operation on your local network.
Press the4button until the cursor is at the Subnet Mask label, and press the
ENTER button to move into the field. Use the arrow button (3456) to enter the
desired address and then press the ENTER button to confirm the selection.
GigE Default Gateway Menu Default: 192.168.054.002
Use the following procedure to set and view the GigE Default Gateway address for
the Ethernet port on the back panel of the DSR-6000. Press the 56 buttons until
the GigE Default Gateway Address menu appears. This menu allows the user to
enter the GigE Default gateway address that the Ethernet port should use. The GigE
Default Gateway is an address that is represented in the common dotted-decimal
format. Contact the network administrator for details about configuring the GigE
port for operation on your local network.
Press the4button until the cursor is at the Default Gateway label, and press the
ENTER button to move into the field. Use the arrow buttons (3456) to enter
the desired address and then press the ENTER button to confirm the selection.
GigE Mode Menu Default: MPTS
Press the 56 buttons until the GigE Mode menu appears. This menu allows the
user to select which multiple program transport stream (MPTS) is routed to the
GigE port. The MPTS contains the output service.
Press the 4 button until the cursor is at the Mode label, and press the ENTER
button to move into the field. Press the 56 buttons to display the two options:
MPTS and Off. Press ENTER to confirm the selection.
PORT GigE Subnet Mask
E 255.255.255.000
PORT GigE Default Gateway
E 192.168.054.002
PORT GigE Mode
E MPTS