49
Video Test Signal Menu
Press the56buttons until the Video Test Signal menu appears. A full-field video
test signal is available and the user can display different test patterns by selecting
the Pattern field.
Pattern Field Default: Off
Press the4button until the cursor is at the Pattern label, and press the ENTER
button to move into the field. Press the 56 buttons to display the test patterns.
Choose from the options listed below:
Press the ENTER button and a warning message appears saying that the current
video display will be interrupted if the action proceeds.
Press any arrow button (3456) to back out of the field and leave it unchanged.
Otherwise, press the ENTER button to proceed.
Test signals override any active service component, and the DSR-6000 displays
diagnostics over the video test patterns if diagnostics are enabled. Disable the
selected signals by displaying OFF or exiting the menu. Press the ENTER button to
exit from the field.
NTSC/PAL M Test Pattern Options
Color Bar
IRE 100 Ramp
NTSC 7 Comb
Red Field
NTSC 7 Comp
5 Step Stair
Unmod Y Ramp
Off (Default)
E Off
VIDEO TEST SIGNAL Pattern
Press E to continue or to stop
CAUTION: This selection replaces video