3
18
Symbol/Code/Format Field
Press the4button until the cursor is at the Symbol label and press the ENTER button to
move into the field. Press the 56 buttons to display the options. For DCII Manual,
use the 56 buttons to scroll through the Symbol/Code/Format combinations. Select
the combination provided by your programmer and press ENTER to return to the top
menu. This field is not available when the DCII-Auto option in the Mode field is
selected. When using the 8PSK-TC and DVBS2 modes, the Symbol field can be edited
to any value up to 33.0000. For each of these non-DCII modes, the Code field is
independently selected from a list of supported values, by using the 56 buttons.
Port Menu
This menu is not available when the ASI input option is selected. That option is
described in the “Manual Tune” menu on page 14.
Because the DSR-6000 has eight RF input ports that can potentially be used to
switch and tune signals from multiple satellite antenna LNBs, the DSR-6000
demands there be an accurate association of the port with the Satellite and Polarity
designators programmed in the Uplink encoder system(s) to which we plan to
downlink from on each port.
Because accuracy is critical, a default AUTO mode has been created for
automatically populating the satellite and polarity fields for the one port that is
currently being tuned. This automatic population of the fields occurs upon entry of
acceptable Channel information.
Leaving this menu unchanged, in AUTO mode, ensures success in getting initial
authorization, decryption and output.
Using the Manual Port Mode setting and manually editing the Port Menu Satellite
and Polarity fields should only be done when given detailed instructions by an
Uplink Signal Provider. Any mismatch between what is entered into these fields
and the Uplink encoder Satellite and Polarity designations for the services will
prevent authorization decryption and service output. Satellite names and polarity
designators for a given service do not necessarily reflect actual satellite names or
even the correct polarity of the actual signal. These values are set within the
provider’s encoder system.
E 1 Auto --- ---
PORT ID Mode Sat Polar