31
Channel Menus

Channel Menu

Press the 56 buttons until the Channel menu appears. This menu allows the user
to select an active VCT, select the virtual channel, and view the name of the current
transponder.
VCT Field
Use this to select a Virtual Channel Table (VCT) number. Contact the program
provider for the correct VCT number to enter for that encoder system. Press
the4button until the cursor is at the VCT label, and press the ENTER button to
move into the field. While ensuring that the cursor remains on the up/down symbol,
press the 56 buttons to scroll throughout the available VCTs. (If the network has
four VCTs, then only four VCTs appear in this field.) Press the ENTER button to
confirm the selection.
This field also provides a second method for selecting the VCT. To do this, use the
34buttons to select the digit to change and then, while the cursor is on that digit,
press the 56 buttons to display the required value. Repeat this process for each
applicable digit.
Channel Field
The Channel field allows selection of the virtual channel for the output service. The
DSR-6000 supports channel values from 0000 to 4095. Press the4button until the
cursor is at the Channel label, and press the ENTER button to move into the field.
While ensuring that the cursor remains on the up/down symbol, press the 56
buttons to scroll through the available virtual channels. (If the chosen VCT
contains twenty-four virtual channels, then only twenty-four virtual channels
appear in this field.) Press the ENTER button to confirm the selection.
This field also provides a second method for selecting the virtual channel. To do
this, use the 34 buttons to select the digit to change and then, while the cursor is
on that digit, press the 56 buttons to display the required value. Repeat this
process for each applicable digit.
E 00000 0000 (Not in m ap)
CHANNEL VCT Channel Xpndr