43
Status Display Menus
Status display menus provide information regarding the current status of the DSR-
6000. This menu lists important Satellite Multiplex Decrypter parameters. These
fields are not editable, and the displayed information is either (1) the result of changes
in an installation or channel selection menu, or (2) a parameter the DSR-6000 reports
as part of its operation.

Status1 Menu

Press the 56 buttons until the Status1 menu appears.
FrontPanel Field
This status-only field displays whether the user is able to control the Satellite
Multiplex Decrypter completely from the front panel or whether some front panel
functions are disabled.
Input Type Field
This status-only field displays the input connector on which the active signal is
received.

Status2 Menu

This menu does not appear if the Input field (described on page 15) is set to ASI In.
Press the 56 buttons until the STATUS2 menu appears. This screen displays the
source name, channel number, and the signal quality.
Source Field
This status-only field displays the source name, which was entered by the
programmer or network operator at the encoder/uplink to identify the source.
Dashes are displayed when no information is available.
E Local Contro l L-Band
STATUS1 FrontPanel Input Type
E --- ---- ---
STATUS2 Source Channel Quality