3
28
Firmware Menu
Press the 56 buttons until the Firmware menu appears. This menu displays the
DSR-6000's firmware release information, which is equivalent to the product
version number. This menu cannot be changed, but since the firmware is
periodically updated, this menu confirms that the update was successful. This menu
is used most commonly in troubleshooting. The High version value (shown below)
is the current firmware version.
Boot:FPGA:High Field
This field displays the version of boot, FPGA, and the high code. The boot code is
loaded at the factory. The FPGA and high codes may be upgraded to later versions
by a download that is delivered over the satellite signal from either the
L-band or ASI input. The code versions are represented by a six-digit hexadecimal
number. This field is non-editable.
Upgrade Field
The Upgrade field displays the version of the upgrade code that is available. This
field displays 000000 when no upgrade code is available. Available upgrades are
installed the next time the DSR-6000 is rebooted. This field is non-editable.
D/C Firmware Menu
Press the 56 buttons until the D/C Firmware menu appears. This menu displays
the release decoder code number. This menu cannot be changed, but since the
firmware is periodically updated, this menu confirms that the update was
successful. This menu is used most commonly in troubleshooting.
FIRMWARE Bo ot:FPGA:High Upg rade
E XXXXXX:XXXXXX:XXXXX 000000
D/C FIRMWARE High
E XXXXXX