3
50
VITS Menu
Press the56buttons until the Vertical Interval Test Signal (VITS) menu appears.
This menu allows the user to insert VITS on lines 17 or 18.
Waveform Field Default: Transmitted
Note: Upon exiting this submenu, the Waveform field will revert back to the
default value (Transmitted).
The Waveform field allows the user to insert a VITS from several internally stored
patterns, from a pattern transmitted over the satellite link, or to turn off VITS
insertion. Press the4button until the cursor is at the Waveform label, and press the
ENTER button to move into the field. Press the 56 buttons to display the options.
Choose from the options listed on the next page.
The Transmitted option (the default) indicates the signal is provided over the
satellite link by the programmer, if one is present. Press the ENTER button to
confirm the selection.
Note: If the Waveform option is neither Transmitted or Disabled, the Field and
Line fields are displayed on the VITS menu.
NTSC/PAL M VITS Pattern Field Options
Transmitted (Default)
Disabled
Color Bar
100 IRE Ramp
NTSC 7 Comb
Red Field
NTSC 7 Comp
5 Step Stair
Unmod Y Ramp
E Transmitted
VITS Waveform
E color Bar 1 17
VITS Waveform Field Line