Snapper NZMJ23521KH, NZMJ25611KH important safety instructions Introduction, Nomenclature

Section 1 - FAMILIARIZATION

			CHOKE		BLADE
							KEY
			CONTROL		SWITCH
							SWITCH
	HOUR
	METER
		CHOKE				ENGINE SPEED
						CONTROL
		CONTROL
						ENGINE
MOTION CONTROL						SPEED
LEVER				OPERATOR’S
				SEAT				LEFT HAND
RIGHT HAND								FUEL TANK
FUEL TANK

DECK LIFT

LEVER

DISCHARGE
DEFLECTOR	DECK LIFT PEDAL

1.1 INTRODUCTION

This manual has been prepared for the operator’s of the SNAPPER MID MOUNT Z-RIDER. Its purpose, aside from recommending standard operating procedures and routine service requirements, is to promote SAFETY through the use of accepted operating practices. Read, Understand and Follow the IMPORTANT SAFETY INSTRUCTIONS on Pages 2 thru 4 of this manual and All SAFETY messages on the MID MOUNT Z-RIDER and its attachments before operating. SNAPPER recommends returning the MID MOUNT Z-RIDER to an authorized SNAPPER dealer annually for inspection and addition of any new devices which might upgrade the safety of the mower.

PARKING

BRAKE LEVER

CONTROL PANEL (SEE INSET)

IMPORTANT

The figures and illustrations in this manual are provided for reference only and may differ from your specific model. Contact your Snapper dealer if you have questions

1.2 NOMENCLATURE

The nomenclature information above shows the essential parts of the SNAPPER MID MOUNT Z- RIDER. It is recommended that all operators of this equipment become thoroughly familiar with the controls, components, and operation of this machine before operating. Specific details involving the engine are found in the separate engine owner’s manual. Study these manuals before operating and keep both handy for future reference. For the nearest SNAPPER dealer in your area, check the yellow pages under the heading LAWN MOWERS. For engine parts and service, look for the engine manufacturer’s dealers under the heading, ENGINES - gasoline.

6