Regular Maintenance

BATTERY MAINTENANCE

Cleaning the Battery and Cables

1.Disconnect the cables from the battery, negative cable first (C, Figure 19).

2.Clean the battery terminals and cable ends with a wire brush until shiny.

3.Reinstall the battery and reattach the battery cables, positive cable first (A).

4.Coat the cable ends and battery terminals with petro- leum jelly or non-conducting grease.

5.Be sure to replace the terminal cover (B) over the positive battery terminal.

STORAGE

Before you store your unit for the off-season, read the Maintenance and Storage instructions in the Safety Rules section, then perform the following steps:

•Disengage the PTO, set the parking brake, & remove the key.

•Perform engine maintenance and storage measures listed in the engine owner’s manual. This includes draining the fuel system, or adding stabilizer to the fuel (do not store a fueled unit in an enclosed struc- ture - see warning).

•Battery life will be increased if it is removed, put in a cool, dry place and fully charged about once a month. If the battery is left in the unit, disconnect the negative cable.

Before starting the unit after it has been stored:

•Check all fluid levels. Check all maintenance items.

•Perform all recommended checks and procedures found in the engine owner’s manual.

•Allow the engine to warm up for several minutes before use.

B

A

C

Figure 19. Battery Compartment

A.Positive (+) Cable & Terminal

B.Positive Terminal Cover

C.Negative (-) Cable & Terminal

WARNING

Be careful when handling the battery. Keep flames and sparks away from the battery. When removing or installing battery cables, disconnect the negative cable FIRST and reconnect it LAST. If not done in this order, the positive terminal can be shorted to the frame by a tool.

WARNING

Never store the unit (with fuel) in an enclosed, poorly ventilated structure. Fuel vapors can travel to an ignition source (such as a furnace, water heater, etc.) and cause an explosion.

Fuel vapor is also toxic to humans and animals.

20

Page 20 Page 22
Page 21
Image 21
Snapper RZT20380KH, RZT185380BVE, RZT20420BVE2 manual Battery Maintenance, Storage, Cleaning the Battery and Cables
Page 20 Page 22

RZT185380BVE, RZT20380KH, RZT20420BVE2 specifications

The Snapper RZT20420BVE2, RZT20380KH, and RZT185380BVE are three standout models in the Snapper line of zero-turn riding mowers, designed for both residential and commercial use. Each of these mowers combines advanced technology, robust engineering, and user-friendly features to deliver a reliable lawn care experience.

The Snapper RZT20420BVE2 is a high-performance model equipped with a powerful 20 HP Kawasaki engine. This unit features a 42-inch cutting deck that enables smooth and efficient mowing for medium to large lawns. One of its key characteristics is the commercial-grade, heavy-duty construction, which ensures durability and longevity. The mower is also designed with a zero-turn radius, allowing for exceptional maneuverability around obstacles and tight spaces, making it ideal for complex lawn designs.

The RZT20380KH model offers a slightly smaller and versatile option with an 18.5 HP Kohler engine. It features a 38-inch cutting deck, providing an effective cut for smaller lawns or areas with numerous landscaping features. The adjustable cutting height ensures a customizable mowing experience, catering to various grass types and growth conditions. The mower's integrated dual hydrostatic transmission provides smooth operation and enhances control, making it easy for users to navigate around flower beds and shrubs.

The Snapper RZT185380BVE model stands out for its exceptional power and efficiency, equipped with a robust 18 HP Briggs & Stratton engine. With a 38-inch deck, it's perfect for homeowners looking for a balance of performance and ease of use. This mower is engineered with a user-friendly operation panel, making it easy for operators to control speed and cutting height. The RZT185380BVE also features Snapper’s innovative mow-in-reverse capability, which allows mowing while reversing, increasing efficiency.

Across these models, Snapper emphasizes comfort and ease of use. They are equipped with plush, high-back seats for added support during extended mowing sessions, as well as lap bars that allow fine control and increased maneuverability. The addition of LED headlights in certain models improves visibility for early morning or late evening mowing.

Each of these Snapper mowers showcases advanced engineering and design tailored to meet diverse lawn care needs. With their impressive performance characteristics, ease of operation, and durable build, the Snapper RZT20420BVE2, RZT20380KH, and RZT185380BVE are excellent choices for anyone looking to maintain a pristine lawn.
Top Page Image Contents