Regular Maintenance

BATTERY MAINTENANCE

Cleaning the Battery and Cables

1.Disconnect the cables from the battery, negative cable first (C, Figure 19).

2.Clean the battery terminals and cable ends with a wire brush until shiny.

3.Reinstall the battery and reattach the battery cables, positive cable first (A).

4.Coat the cable ends and battery terminals with petro- leum jelly or non-conducting grease.

5.Be sure to replace the terminal cover (B) over the positive battery terminal.

STORAGE

Before you store your unit for the off-season, read the Maintenance and Storage instructions in the Safety Rules section, then perform the following steps:

•Disengage the PTO, set the parking brake, & remove the key.

•Perform engine maintenance and storage measures listed in the engine owner’s manual. This includes draining the fuel system, or adding stabilizer to the fuel (do not store a fueled unit in an enclosed struc- ture - see warning).

•Battery life will be increased if it is removed, put in a cool, dry place and fully charged about once a month. If the battery is left in the unit, disconnect the negative cable.

Before starting the unit after it has been stored:

•Check all fluid levels. Check all maintenance items.

•Perform all recommended checks and procedures found in the engine owner’s manual.

•Allow the engine to warm up for several minutes before use.

B

A

C

Figure 19. Battery Compartment

A.Positive (+) Cable & Terminal

B.Positive Terminal Cover

C.Negative (-) Cable & Terminal

WARNING

Be careful when handling the battery. Keep flames and sparks away from the battery. When removing or installing battery cables, disconnect the negative cable FIRST and reconnect it LAST. If not done in this order, the positive terminal can be shorted to the frame by a tool.

WARNING

Never store the unit (with fuel) in an enclosed, poorly ventilated structure. Fuel vapors can travel to an ignition source (such as a furnace, water heater, etc.) and cause an explosion.

Fuel vapor is also toxic to humans and animals.

20

Page 20 Page 22
Page 21
Image 21
Snapper RZT20440BVE2, RZT22500BVE2 manual Battery Maintenance, Storage, Cleaning the Battery and Cables
Page 20 Page 22

RZT20440BVE2, RZT22500BVE2 specifications

The Snapper RZT22500BVE2 and RZT20440BVE2 are innovative riding mowers that exemplify the cutting-edge features and technologies available in modern lawn care equipment. These models are designed to enhance user experience, improve efficiency, and deliver exceptional cutting performance for residential and commercial users alike.

The Snapper RZT22500BVE2 is powered by a robust 25 HP Briggs & Stratton Intek V-twin engine. This powerful engine enables the mower to handle tough grass types and navigate challenging terrain with ease. Coupled with a 48-inch stamped steel cutting deck, this mower offers a smooth and precise cut, ensuring a professionally manicured lawn in a fraction of the time. The RZT22500BVE2 is equipped with Snapper's patented Infinite Speed Control, allowing users to adjust their speed effortlessly, making it easy to maneuver around obstacles or tackle tight corners.

On the other hand, the RZT20440BVE2 features a 20 HP Briggs & Stratton engine that provides ample power for regular mowing activities. With a slightly smaller yet equally efficient 42-inch cutting deck, this model is perfect for users with smaller properties or tighter spaces. The RZT20440BVE2 also boasts Instant Response Control, making it incredibly user-friendly by offering smooth transitions in speed and direction.

Both models incorporate the latest in technology to enhance the mowing experience. The dual hydrostatic transmission system in these riding mowers delivers seamless control, allowing users to drive forward or reverse with ease, without compromising power. An ergonomic seat design provides comfort during extended mowing sessions, reducing fatigue.

Additionally, both models come with a clean-out port, enabling easy maintenance of the cutting deck by allowing users to wash grass clippings away after each use. They also feature durable, heavy-duty construction, ensuring longevity and reliability in various weather conditions.

In conclusion, the Snapper RZT22500BVE2 and RZT20440BVE2 are excellent choices for lawn care enthusiasts looking for powerful, efficient, and user-friendly riding mowers. With their advanced features and reliable performance, these models stand out in the market, making lawn maintenance easier and more enjoyable. Whether you opt for the power of the RZT22500BVE2 or the compact efficiency of the RZT20440BVE2, both offer outstanding value and superior performance for all your mowing needs.
Top Page Image Contents