Snapper S150X manual Attention Setup Personnel, Table Of Contents

Dealer Setup

& Adjustment Instructions

S150X - 21HP, 23HP, 25HP & 27HP

48” & 52” Mower Deck

This Dealer Setup Instruction covers the following products:

Model No.	Description
5900686	S150XKAV2148, 21HP Kawasaki w/ 48” Mower
5900665	S150XKAV2552, 25HP Kawasaki w/ 52” Mower
5900696	S150XKOH2348 S/S, 23HP Kohler w/48” Mower
5900697	S150XKOH2752 S/S, 27HP Kohler w/52” Mower

ATTENTION SETUP PERSONNEL:

The safety warnings provided in this guide and in the operator's manual included with the unit contain

important information that must be obeyed when assembling, setting-up, operating, servicing,

transporting, or storing the unit.

These warnings are highlighted by the safety alert triangle symbol shown above, which signifies that an important safety message is being provided.

You must read, understand, and follow these warnings and instructions, and use safe shop and work practices at all times while working on or around this unit and all other outdoor power equipment.

TABLE OF CONTENTS:
SETUP PROCEDURES
Quick Setup List	2
Uncrating	3
Battery Installation	3
Tractor Assembly	4
Motion Control Handle Assembly	4
Seat Assembly	4
Roll Bar Installation	5
Check Fluid levels	7
Check Engine Oil Level	7
Check Hydraulic Oil Level	7
Check Tire Pressure	7
Check Mower Assembly	8
Check Torque - Mower Blades	8
Check Deck Rod Timing	9
Deck Leveling Adjustment	10
Check Deck Drive Belt	11
Lubrication	12
Adding Fuel	13
Starting The Engine	13
Perform Safety Checks	14

Sections and items denoted by the Setup symbol provide the information necessary to fully assemble, test, and prepare the units described above for delivery to your customers.

A Quick Setup List is provided on page 2 of this booklet to help you identify and check that the items have been performed.

Additional information concerning functional tests,

general adjustment procedures, and the location of

normal lubrication points are included in these instructions.

Although all required lubrication and normal adjustments on factory-assembled components are done at the factory, this additional information is provided to assist you in ensuring that each unit is delivered to the customer in proper working order.

Functional Tests	14
Safety Interlock System	14
ADJUSTMENT PROCEDURES
Seat Adjustment	15
Seat Adjustment (Suspension Seat)	15
Motion Control Handle Adjustment	16
Return-To-Neutral Adjustment	17
Neutral Adjustment	17
Parking Brake Adjustment	18

		5101096
10/2007	1	Rev. A
		TP 300-7343-A-M1-SP