SECTION 3 - OPERATING INSTRUCTIONS

3.1 PRE-START CHECKLIST

Make the following checks and perform the services as required before each start-up.

IMPORTANT: Before starting your SNAPPER Pro Hydro machine, the hydraulic reservoir and engine MUST be filled to the proper level with oil.

3.1.1.HYDRAULIC OIL RESERVOIR: Use SAE 10W- 30 oil. Fill reservoir with oil until the level comes to within 1-1/2 inches from the top of the filler neck. Check on level surface with engine off. See Figure 3.1.

OIL FILL

1-1/2

LINE

 

WARNING

Use approved fuel container. DO NOT smoke near open fuel container. DO NOT fill fuel tank indoors or when engine is running. Allow engine to cool for at least ten minutes before refilling. Wipe off any spilled fuel before starting engine. DO NOT run engine indoors.

7.Add fuel to tank after pushing the machine outside where FUMES can be dissipated. Make sure Fuel Tank Cap is tightened after refueling. (Refer to Engine Owner’s Manual for Fuel specifications).

3.1.3.BEFORE OPERATING

Be thoroughly familiar with ALL controls and know how to use them before operating the mower. Know beforehand how to STOP the Traction Drive Wheel Motors, Mower Blades and Engine in preparation for a possible emergency.

HYDRAULIC OIL RESERVOIR

IMPORTANT: FLUID LEVEL MUST BE ABOVE TOP OF BAFFLE. RESERVOIR CAPACITY IS ONE (1) GALLON. DO NOT OVERFILL.

FIGURE 3.1

3.1.2.ENGINE OIL: Add oil as needed to bring up to, but not over, the FULL mark. Refer to the Engine Owner’s Manual for oil specifications.

1.If required, make cutting height adjustments. Refer to Section “CUTTING HEIGHT ADJUSTMENT”.

2.Check tires and add air as needed to bring pressure to 25 PSI in front tires and 12-15 PSI in rear tires.

3.Check Guards, Deflectors and Belt Covers to make sure all are in place and secure.

4.Check condition of Cutter Deck Belt(s). If damaged, replace with original part. Refer to Section “CUTTER DECK BELT REMOVAL”.

5.Clean Interior and Exterior surfaces of Cutting Deck and clean Engine of any accumulation of dirt, grass, oil, etc. Keep Engine Air Intake Screens and Cooling Fins clear at ALL times.

6.Check Engine Oil Reservoir and add oil as needed to bring level up to but not over the FULL mark. (Refer to Engine Owner’s Manual for oil specifications).

7

Page 6 Page 8
Page 7
Image 7
Snapper SP400, SP300, SPLH221KWE, SPLH151KW, SPLH171KW Operating Instructions, PRE-START Checklist, Before Operating
Page 6 Page 8

SPLH141KW, SPLH151KW, SPLH141KWE, SPLH171KW, SP400 specifications

The Snapper SP300, SPLH221KWE, SP400, SPLH171KW, and SPLH141KWE represent a range of high-performance lawn mowers designed to meet the diverse needs of homeowners and landscape professionals alike. Each model comes equipped with distinct features and technologies that enhance functionality, efficiency, and user experience.

Starting with the Snapper SP300, this robust walk-behind mower is powered by a reliable engine that delivers ample power for tackling various grass types and conditions. Its innovative cutting system includes a tough steel deck that ensures durability while providing a clean cut every time. The SP300 also boasts adjustable cutting height settings, allowing users to customize their lawn mowing to achieve the desired grass length.

The SPLH221KWE is designed for those who prioritize convenience and advanced technology. This model features a self-propelled drive system, making it easier to maneuver on different terrains. The electric start function enhances usability, eliminating the need for pull cords. This mower is equipped with a mulching capability, allowing clippings to be finely chopped and returned to the lawn as organic fertilizer.

Next is the Snapper SP400, which is built for efficiency and power. Featuring a larger cutting deck, this mower can cover more ground in less time. Its high-performance engine ensures steady power delivery even in tough mowing conditions. The SP400 also includes a bagging system that effectively collects grass clippings, promoting a neat and tidy lawn finish.

The SPLH171KW is a compact yet powerful option, perfect for smaller yards or tight spaces. Despite its size, it does not compromise on features, as it supports height adjustments and comes with a durable blade that provides precision cutting. This model is designed for easy storage, making it suitable for homeowners with limited garage space.

Finally, the SPLH141KWE combines lightweight design with powerful performance. This mower is ideally suited for those who prefer a user-friendly experience without compromising on results. With its easy-start technology and adjustable speed settings, users can operate the mower comfortably across different lawn conditions.

When considering these Snapper models, it's important to note that they are all engineered with user comfort in mind, featuring comfortable grips, intuitive controls, and minimal maintenance requirements. With a focus on ease of use, performance, and longevity, Snapper mowers are a valuable investment for maintaining a pristine lawn. Whether you choose the SP300, SPLH221KWE, SP400, SPLH171KW, or SPLH141KWE, you can expect exceptional quality and results.
Top Page Image Contents