Manuals / Snapper / Lawn and Garden / Lawn Mower

Snapper SPLH141KWE, SP400, SP300, SPLH221KWE, SPLH151KW Traction Control Neutral Adjustment

Models: SPLH141KW SPLH151KW SPLH141KWE SPLH171KW SP400 SPLH221KWE SP300

1 32
Download 32 pages 47.63 Kb
Page 19
Image 19

SECTION 4 - SERVICE

4.4 TRACTION CONTROL NEUTRAL ADJUSTMENT

The Traction Control Neutral Adjustment procedure is sensitive. The following steps and WARNINGS must be followed very carefully.

WARNING

Several steps of the Neutral Adjustment procedure require that the engine be started. Exercise extreme CAUTION while making adjustments while engine is running to avoid HOT engine components, rotating components, run over or entrapment types of injuries.

IMPORTANT: To complete this procedure a steel rod 5/16” diameter and 20” long will be required. DO NOT begin this procedure without it.

1.Place machine on smooth level surface. Stop engine and remove keys.

2.Raise rear of machine just high enough for rear wheels to clear ground. Block machine securely.

3.Latch Traction Controls in Neutral.

4.Insert rod (5/16” diameter x 20” long) through alignment holes in the left and right traction control shift lever arms and the tank support bracket. The rod should pass through both the left and right traction control shift lever arms. See Figure 3.9.

5.Disconnect left & right swivels from the left and right traction control arms and loosen swivel jam nuts. See Figure 3.8.

6.Adjust swivel (Clockwise or Counter-Clockwise) until the pin on the swivel aligns perfectly with the hole in the traction control arm. The traction control lever must be held in the Neutral Latch position when making this adjustment. Complete this adjustment for both left and right swivels. Carefully reattach and secure swivels to control arms. Tighten swivel jam nuts. IMPORTANT: Both the left and the right swivels must be installed in the same traction control arm speed range setting. Mid range (middle hole) setting is recommended.

7.Remove steel rod from shift lever arms.

8.Check to insure machine is securely blocked. Start engine. Drive wheels should not rotate with traction control levers latched in the Neutral position. If no rotation is observed the adjustment procedure is complete. If wheels do rotate proceed to next step. STOP ENGINE.

9.Wheel rotation will be stopped by adjusting the eccentric on the pump arms on the right and left pumps. Turning the eccentric slightly clockwise or counter-clockwise will synchronize the pump and traction controls for Neutral. See Figure 3.11. To turn the eccentric, first loosen the bolt in the pump control arm and the nut and bolt fastening the eccentric to the pump control arm. With traction controls latched in Neutral, start engine. Turn eccentric slightly clockwise or counter-clockwise until wheels stop rotating. Tighten control arm bolts and eccentric nut and bolts. Check for wheel rotation. Repeat eccentric adjustment if needed.

19

Page 18 Page 20
Page 19
Image 19
Snapper SPLH141KWE, SP400, SP300, SPLH221KWE, SPLH151KW, SPLH171KW Traction Control Neutral Adjustment
Page 18 Page 20

SPLH141KW, SPLH151KW, SPLH141KWE, SPLH171KW, SP400 specifications

The Snapper SP300, SPLH221KWE, SP400, SPLH171KW, and SPLH141KWE represent a range of high-performance lawn mowers designed to meet the diverse needs of homeowners and landscape professionals alike. Each model comes equipped with distinct features and technologies that enhance functionality, efficiency, and user experience.

Starting with the Snapper SP300, this robust walk-behind mower is powered by a reliable engine that delivers ample power for tackling various grass types and conditions. Its innovative cutting system includes a tough steel deck that ensures durability while providing a clean cut every time. The SP300 also boasts adjustable cutting height settings, allowing users to customize their lawn mowing to achieve the desired grass length.

The SPLH221KWE is designed for those who prioritize convenience and advanced technology. This model features a self-propelled drive system, making it easier to maneuver on different terrains. The electric start function enhances usability, eliminating the need for pull cords. This mower is equipped with a mulching capability, allowing clippings to be finely chopped and returned to the lawn as organic fertilizer.

Next is the Snapper SP400, which is built for efficiency and power. Featuring a larger cutting deck, this mower can cover more ground in less time. Its high-performance engine ensures steady power delivery even in tough mowing conditions. The SP400 also includes a bagging system that effectively collects grass clippings, promoting a neat and tidy lawn finish.

The SPLH171KW is a compact yet powerful option, perfect for smaller yards or tight spaces. Despite its size, it does not compromise on features, as it supports height adjustments and comes with a durable blade that provides precision cutting. This model is designed for easy storage, making it suitable for homeowners with limited garage space.

Finally, the SPLH141KWE combines lightweight design with powerful performance. This mower is ideally suited for those who prefer a user-friendly experience without compromising on results. With its easy-start technology and adjustable speed settings, users can operate the mower comfortably across different lawn conditions.

When considering these Snapper models, it's important to note that they are all engineered with user comfort in mind, featuring comfortable grips, intuitive controls, and minimal maintenance requirements. With a focus on ease of use, performance, and longevity, Snapper mowers are a valuable investment for maintaining a pristine lawn. Whether you choose the SP300, SPLH221KWE, SP400, SPLH171KW, or SPLH141KWE, you can expect exceptional quality and results.