SECTION 5 - MOWER ATTACHMENT SERVICE

5.1.5. SPINDLE TO SPINDLE DECK BELT INSTALLATION - 48”, 52”, & 61” CUTTING DECKS

1.Route new belt for 48” cutting deck, 52” cutting deck, and 61” cutting decks, onto bottom groove of center Spindle Pulley and left hand Spindle Pulley. See Figure 5.3.

2.Install cutting deck belt according to CUTTING DECK BELT INSTALLATION.

5.2 CUTTING BLADE SERVICE

Check Blades at frequent intervals to insure they are securely tightened and in good condition. Replace if chipped, bent, or notched. See Figure 5.4 for Blade wear limits.

NEW BLADE

WEAR LIMIT (NOTCH STARTS)

DANGEROUS

CONDITION!

DO NOT USE ON MOWER!

REPLACE WITH NEW

FIGURE 5.4

1.Use the following chart for ordering replacement Blades for the 36”, 48”, 52” and 61” cutting decks.

STANDARD BLADE REPLACEMENT

36” DECK

48” DECK

52” DECK

61” DECK

2-9246

2-9247

2-9246

2-9251

5.2.1.BLADE REMOVAL AND SHARPENING

1.Move the Mower to a smooth, level surface, turn the Ignition Key to STOP position, remove Key, disconnect Spark Plug Wire from Spark Plug and secure Wire away from Plug.

2.Remove Blades.

WARNING

Take NOTE of the number of Blade Spacers that are under the Blade Mounting Nuts and on the Spindle side of the Blade.

3.Clean and inspect each Blade for excessive wear and damage. See Figure 5.4 for Blade wear limits.

4.Refer to the STANDARD REPLACEMENT BLADES chart above for correct SNAPPER replacement Blades.

5.Should Blades be in acceptable condition, sharpen at 22 to 28 degrees. See Figure 5.5.

HEAVY END

22º to 28º

OF BLADE

 

BLADE

 

BLADE TIP

1/64”

ORIGINAL CUTTING EDGE

FIGURE 5.5

NOTE: When sharpening Blades, leave 1/64” untouched. Razor sharp Blades will chip easily and dull quickly. Commercial balancers are available and should be used in accordance with the manufacturer’s instructions.

6.Balance each Blade after sharpening by grinding metal from the heavy end of the blade.

7.Place the Blade mounting bolt into Blade and place Blade spacers over bolt. Make certain each blade is installed with the same amount of spacers removed.

8.Install Blade mounting bolt with spacers and blade into spindle.

9.Install an equal amount of Blade spacers onto each Blade mounting bolt.

10.Install the Blade mounting nut on each Blade mounting bolt. See Figure 5.6.

11.Torque each Blade mounting bolt and nut to 70 - 80 foot-pounds.

AIR LIFT

HEIGHT

ADJUSTING

SPACERS

BLADE

BEVELED

WASHER

TIGHTEN TO 70-80

MOUNTINGFOOT POUNDS

BOLT

FIGURE 5.6

21

Page 21
Image 21
Snapper SP400, SP300 Cutting Blade Service, Standard Blade Replacement, Deck 9246 9247 9251, Blade Removal and Sharpening

SPLH141KW, SPLH151KW, SPLH141KWE, SPLH171KW, SP400 specifications

The Snapper SP300, SPLH221KWE, SP400, SPLH171KW, and SPLH141KWE represent a range of high-performance lawn mowers designed to meet the diverse needs of homeowners and landscape professionals alike. Each model comes equipped with distinct features and technologies that enhance functionality, efficiency, and user experience.

Starting with the Snapper SP300, this robust walk-behind mower is powered by a reliable engine that delivers ample power for tackling various grass types and conditions. Its innovative cutting system includes a tough steel deck that ensures durability while providing a clean cut every time. The SP300 also boasts adjustable cutting height settings, allowing users to customize their lawn mowing to achieve the desired grass length.

The SPLH221KWE is designed for those who prioritize convenience and advanced technology. This model features a self-propelled drive system, making it easier to maneuver on different terrains. The electric start function enhances usability, eliminating the need for pull cords. This mower is equipped with a mulching capability, allowing clippings to be finely chopped and returned to the lawn as organic fertilizer.

Next is the Snapper SP400, which is built for efficiency and power. Featuring a larger cutting deck, this mower can cover more ground in less time. Its high-performance engine ensures steady power delivery even in tough mowing conditions. The SP400 also includes a bagging system that effectively collects grass clippings, promoting a neat and tidy lawn finish.

The SPLH171KW is a compact yet powerful option, perfect for smaller yards or tight spaces. Despite its size, it does not compromise on features, as it supports height adjustments and comes with a durable blade that provides precision cutting. This model is designed for easy storage, making it suitable for homeowners with limited garage space.

Finally, the SPLH141KWE combines lightweight design with powerful performance. This mower is ideally suited for those who prefer a user-friendly experience without compromising on results. With its easy-start technology and adjustable speed settings, users can operate the mower comfortably across different lawn conditions.

When considering these Snapper models, it's important to note that they are all engineered with user comfort in mind, featuring comfortable grips, intuitive controls, and minimal maintenance requirements. With a focus on ease of use, performance, and longevity, Snapper mowers are a valuable investment for maintaining a pristine lawn. Whether you choose the SP300, SPLH221KWE, SP400, SPLH171KW, or SPLH141KWE, you can expect exceptional quality and results.