Demco AB20001 owner manual TIP Placement, Conventional Nozzles and Boom Clamps

TIP PLACEMENT

1. Marking location of boom clamps: Mark the clamp	NOTE: 40' Boom ...... 25 Tips
locations by starting at the center of the center boom section.	45' Boom ...... 27	Tips
From this mark, locate 20 inch spaces to both ends of the	50' Boom ...... 31	Tips(w/ 1" Ext.Tube)

boom.		BASIC PLUMBING PARTS LIST
2. Fasten preassembled boom lines: Fasten the boom	REF.	PART
	NO.	NO.	DESCRIPTION
clamps (#3) on the boom so the sprayer tip will be on the back	-	340RB	3/4" Rubber Hose
side of the boom. The wing extensions for the 60 foot boom are	-	B12H	3/4" Gear Clamp
1 inch tubing. Therefore, this boom will have two size clamps.	-	NHT11	Nylon Hose Ties
	Please order replacement parts by PART NO. and DESCRIPTION.

Feeder Line Routing and Tip Placement for Inner Hinge Feeder Line Routing and Tip Placement for Outer Hinge

1

3

3

2

CONVENTIONAL NOZZLES AND BOOM CLAMPS

1-1/4" BOOM CLAMP PARTS LIST

		REF.	PART
4		NO.	NO.	DESCRIPTION
		-	B11 114	1-1/4" Boom Clamp Assembly
		1.	00068	1/4"-20UNC x 3/4" Hex Head Bolt
	5	2.	00062	1/4"-20UNC Hex Nut
		3.	00337	1-1/4" Boom Clamp
		-	00338	1" Boom Clamp

	REF.	PART	3/4" NOZZLE PARTS LIST
	NO.	NO.	DESCRIPTION
6	4.	NTL34	3/4" Nozzle Tee
	5.	NTT34	3/4" Nozzle Elbow
*	6.	B12	Nut
	*	------	Tip (specify tip size) (not included)
7	7.	8027	11/16" FPS Cap
	Please order replacement parts by PART NO. and DESCRIPTION.

DRIP FREE NOZZLES AND BOOM CLAMPS

9

1 10

3

3

2

8

11

12 14

*

13

3/4" NOZZLE PARTS LIST

REF.	PART
NO.	NO.	DESCRIPTION
-	DF34NTL	3/4" Nozzle Elbow & Check Valve Assembly
-	DF34NTT	3/4" Nozzle Tee & Check Valve Assembly
8.	DF34T	3/4" Nozzle Tee
9.	DF34E	3/4" Nozzle Elbow
10.	DFB12	Nut
11.	DFCP	Spring Retainer Cap Assembly
12.	DFDV	Diaphragm (viton)
13.	DFFD	Floodjet Cap (red)
-	DFFT	Flat Cap (yellow)
14.	DFGE	Gasket (EPDM)
*	------	Tip (specify tip size) (not included)

Please order replacement parts by PART NO. and DESCRIPTION.

Page 8