Section 2 - OPERATING INSTRUCTIONS
WARNING
DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.
2.7INSTALLATION of GRASS BAG
(Slide Closure Type, Optional Accessory on Some Models)
Install grass bag as shown. Adapter must be installed first, before grass bag can be installed.
A. Install the top wire to the grass bag. Tie the bag slider to the top wire. Fold bag opening into a "Z" and pull bag into slider. See Figure 2.9.
BAG
SLIDER
“Z” FOLD BAG AS SHOWN
FIGURE 2.9
B. Position grass bag between handles. See Figure
2.10.Install grass bag by sliding connector over flange of adapter. Attach grass bag hooks over middle handle cross bar. See Figure 2.11.
LOWER HANDLES
HANDLE
BAG CONNECTOR
ADAPTER
FLANGE
FIGURE 2.10
HOOK BAG HANDLE
OVER LOWER
HANDLES
SLIDE CONNECTOR
OVER END OF
ADAPTER FLANGE
FIGURE 2.11
WARNING
DO NOT operate without entire Grass Bag or guard in place. Grass Bag components are subject to deterioration during normal use. Inspect frequently and replace worn or damaged components immediately.
9