Action: Polaris 140/145 does not travel to all areas of the pool.
Solution: 1. Using the flow indicator (#24), verify proper flow to cleaner.
2.Verify that hose is adjusted to proper length and weights (#23) are positioned correctly
3.Rotate steering skirt (#15) to opposite side of the cleaner.
4.Verify that swivel (#1) turns freely.
5.Reposition eyeball fittings installed on return lines so flow moves hose and cleaner to all areas of the pool.
Action: | Hose becomes tangled. |
Solution: 1. Using flow indicator (#24), verify proper flow to cleaner.
2.Verify that swivel (#1) turns freely.
3.If dedicated suction line installation, attach 45° elbow (#20), angle it upward and attach hose.
Action: Air bubbles come out of the return line during operation.
Solution: 1. Using flow indicator (#24), verify proper flow to cleaner.
2.Verify that hose connections are secure. Check hoses for leaks.
3.Verify that skimmer connections and adapters are secure.
Troubleshooting Worksheet
If these solutions do not result in improved performance, contact the Polaris dealer who sold you the cleaner or call Customer Service.
In order to provide faster and more convenient service, please have the following information available at the time of your call or when taking the Polaris in for service.
1.Serial #:________________________
2.Is the feed hose the proper length?
■ Yes ■ No
How many hose sections are used? ________
How many hose sections extend past the end of the pool? ______
3.Is the swivel rotating freely?
■ Yes | ■ No |
4. What is the pool filter pressure?
Now? ___________________psi
Just after cleaning? ________psi
When was the pool filter last cleaned?
■
■
■Over 6 months ago
5.Is the cleaner receiving proper water flow?
■ Yes | ■ No |
3.Are the bypass intake and ball valve chamber clear of debris?
■ Yes | ■ No |
English
www.polarispool.com