Section 4 - ADJUSTMENTS & REPAIR

WARNING

DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug. Engine and components can be extremely hot. Avoid burns by allowing engine and components sufficient time to cool. Wear heavy leather gloves when handling or working around cutting blades. Blades are extremely sharp and can cause severe injury.

4.3 MOWER BLADE REPLACEMENT 4.3.1. BLADE WEAR LIMITS

1.Inspect blade frequently for signs of excessive wear or damage. See Figure 4.11.

NEW BLADE

WEAR LIMIT (NOTCH STARTS)

DANGEROUS CONDITION!

DO NOT USE ON MOWER!

REPLACE WITH NEW BLADE.

FIGURE 4.11

4.3.2. BLADE SHARPENING

1.Close vent on fuel cap and make sure cap is tight. Close fuel valve in fuel line. Start engine and allow it to run until engine runs out of fuel.

2.Remove key from ignition switch.

3.Remove spark plug wire(s) and secure away from spark plug(s).

4.Carefully stand SCRAMBLER on rear bumper.

5.Remove blade(s). See Figure 4.12.

6.Inspect condition of blade. See Figure 4.11.

7.If blade is in good condition, sharpen at 22 to 28 degrees. DO NOT sharpen beyond existing cutting edge. See Figure 4.13.

8.Check blade balance after sharpening. If necessary, correct blade balance by grinding the heavy end of blade.

9.Reinstall blade. See Figure 4.12. Torque blade mounting bolts to recommended range of:

42” Deck - 30 to 40 ft. lbs. 48” Deck - 80 to 90 ft. lbs.

48” DECK

42” DECK

FIGURE 4.12

DO NOT SHARPEN

BEYOND ORIGINAL 22º TO 28º

CUTTING EDGE

BLADE TIP

ORIGINAL CUTTING EDGE

FIGURE 4.13

WARNING

DO NOT use a cutting blade that shows signs of excessive wear or damage. Wear heavy leather gloves when handling or working around cutting blades. Blades are extremely sharp and can cause severe injury.

4.3.3. BLADE REPLACEMENT

1.Remove blade(s). See Figure 4.12. Replace blade(s) if it shows signs of excessive wear or damage.

NOTE: For all cutting blade replacement part

numbers refer to Section: “MAINTENANCE /REPLACEMENT PARTS”.

21

Page 20 Page 22
Page 21
Image 21
Snapper YZ18425BVE, YZ20485BVE Mower Blade Replacement 4.3.1. Blade Wear Limits, Blade Sharpening, Deck
Page 20 Page 22

YZ18425BVE, YZ20485BVE specifications

The Snapper YZ18425BVE and YZ20485BVE represent a significant advancement in outdoor power equipment, specifically designed for those who seek performance, reliability, and efficiency in their lawn care endeavors. These models combine cutting-edge technology and user-friendly features, making them ideal choices for both residential and commercial applications.

At the heart of both models is a robust engine designed to deliver exceptional power. The YZ18425BVE features an 18 horsepower engine, while the YZ20485BVE boasts a more powerful 20 horsepower variant. This substantial power allows for swift and efficient mowing, easily cutting through thick grass and tackling uneven terrains. Both engines are engineered with fuel efficiency in mind, enabling longer operational hours on a single tank and reducing the frequency of refueling.

One of the standout features of the Snapper YZ series is its innovative cutting deck design. With a precise cutting width of 42 inches for the YZ18425BVE and 48 inches for the YZ20485BVE, these mowers provide a clean and consistent cut, ensuring an immaculate lawn. The deck is constructed for durability, featuring advanced materials that withstand the rigors of regular use while maintaining performance.

User comfort and control are paramount in the design of these models. Both mowers come equipped with an ergonomic seat and an intuitive control layout, allowing operators to maneuver with ease and precision. The YZ20485BVE also includes advanced suspension features that enhance the overall riding experience, reducing vibrations and increasing operator comfort during extended use.

In terms of safety, the Snapper YZ series prioritizes user protection. Key safety features include automatic blade shut-off systems and easy-to-reach controls that ensure operators can quickly respond to any situation. Additionally, these models are designed with stability in mind, featuring a wide wheelbase that improves traction and control on various terrains.

Both the YZ18425BVE and YZ20485BVE are equipped with easy maintenance features, such as accessible oil and air filters, allowing users to perform routine checks and servicing without hassle. This commitment to maintenance ease ensures that the mowers remain in peak condition for years of reliable service.

Overall, the Snapper YZ18425BVE and YZ20485BVE are exemplary choices for those looking for high-performance lawn mowers that combine power, efficiency, and user comfort.
Top Page Image Contents