STEP 3: Insert the Card Insert the card into your Palm device’s SDIO slot. Make sure the card is
positioned correctly. Do not force or shove the card in too hard.
Older Palm m100 & m500 series devices: The SDIO slot is
reversed, so the scanner must be inserted backwards.
To remove the SD Scan Card 3E, push the card completely
into the slot. After the card springs back, you can safely
remove the card. Do not pull the card out without pushing
first, or you may damage the connector the next time you
insert a card
Make sure you have soft reset your device after software
installation before you insert the card. Press the reset button.
CHAPTER 3: SETUP FOR PALM 23