STEP 6: Scan Data into Your Application
1.Start the Windows application that you want to receive the data (e.g., Excel, Notepad, etc.). Make sure a document or spreadsheet is open.
2.Press the trigger button and scan the code. For example, try this bar code:
When data is read, depending on the settings you chose in the Socket CHS configuration tool, the scanner may beep and/or the LED may flash green, and the laser will turn off. If the Scanner fails to read data within a few seconds, the laser will turn off, and you must try again.
3.After a successful scan, data should appear in your document. For example, after you scan the code above into a Pocket Excel spreadsheet, data should appear in the first cell.
Note:
Wait for the “Good Scan” indication before you scan another bar code. If you try to scan too fast, the device can lock up until you stop scanning.
If your device enters sleep mode, the Bluetooth connection will be lost, and you will need to
For information about bar code scanning applications, please email info@socketcom.com
CHAPTER 2: SETUP FOR WINDOWS MOBILE | 13 |
