Diagram 6

6. Determine the latitude range that you need (refer to Diagram 3)

 

and position the hole that is marked “A” in Diagram 5 at that

 

location. Note that this hole is located at the rounded part of the

 

altitude bar.

 

7. Attach two of the screws (one on either side of the adjuster bar),

 

but do not tighten. Rotate the altitude adjuster bar around this pivot

 

point until one of the other holes lines up. Insert the remaining two

 

screws. Lightly tighten so that you still have some ability to move

 

the bar.

 

8. Note that the altitude adjustment knob is attached to a threaded

 

rod that travels through the altitude adjuster bar. Turn the knob so

 

that the altitude adjuster bar is positioned approximately in the

 

middle of the threaded rod. You should see about half of the

 

threaded rod protruding from both sides of the altitude adjuster

 

bar. This will allow you to move the mount fully within the altitude

 

range.

 

9. At the end of the threaded rod mentioned in the last step, you will

 

see a small brass altitude adjuster thrust pad. This is the part that

 

will come in contact with the polar axis as you ease it back into

 

position. Loosen the altitude locking knob (motor/gear side) and

 

lower the polar axis so that it rests comfortably on this pad. The

Diagram 5

threaded rod should be positioned at a right angle to the polar axis

housing. Firmly tighten the altitude adjustment screws.

 

10.Turn the altitude adjustment knob to raise or lower the polar axis to your approximate observing latitude. Tighten the altitude locking knobs with finger pressure only. You do not need to tighten with the hex key.

11.Firmly tighten both polar axis pivot screws with the hex key.

Attach Pier Adapter to Pier Post

If you purchased the pier from Astro-Physics, the pier top adapter of the 1200 may be already attached to the top of the pier. If you are constructing your own pier or tripod, you will need to incorporate this part. The pier adapter was designed to fit into a 10" x 0.094" wall tube. Use six (6) screws to attach this part. Note that with the Astro-Physics pier, you can orient the pier adapter so that one of the pier legs faces "north" or "south" as you prefer.

Assemble Pier (purchased separately)

Begin by assembling the portable pier at the desired observing location. Note which direction is north.

1.Slide the three legs onto the nubs of the base and rotate the assembly so that one of the legs points toward north (or south, if that is your preference).

2.Place the pier post on the base orienting the center azimuth block directly north. If you choose to have one leg north, then the pier adapter plate will have to be installed with the azimuth block directly over a turnbuckle. If you have one leg south, the pier adapter plate will have to be installed with the azimuth block over and between two of the pier post turnbuckles.

3. Attach the tension rods. The turnbuckles should be drawn tight

until the whole assembly is stiff enough to support your weight without movement.

9

Page 8 Page 10
Page 9
Image 9
Socket Mobile GTOCP2 manual Assemble Pier purchased separately, Attach Pier Adapter to Pier Post
Page 8 Page 10

GTOCP2 specifications

The Socket Mobile GTOCP2 is a cutting-edge portable barcode scanner designed for businesses seeking efficiency and speed in their operations. Renowned for its streamlined functionality and user-friendly interface, the GTOCP2 elevates everyday tasks, offering features tailored to enhance productivity in various settings.

One of the main features of the GTOCP2 is its advanced scanning technology. Equipped with a high-performance 2D imager, this device is capable of quickly scanning a wide range of barcode formats, including QR codes and traditional 1D barcodes. This versatility enables users to capture information accurately and swiftly, bolstering workflow efficiency across diverse applications such as retail, inventory management, and healthcare.

The GTOCP2 also emphasizes connectivity, supporting Bluetooth technology for seamless pairing with smartphones, tablets, and other compatible devices. This wireless capability allows for greater mobility, as users can scan items from a distance without being tethered to a stationary system. Additionally, it's compatible with iOS, Android, and Windows devices, making it an ideal solution for a range of operating environments.

Ergonomics play a significant role in the design of the Socket Mobile GTOCP2. The scanner boasts a compact, lightweight form factor, ensuring comfortable handling during prolonged use. Its intuitive design promotes ease of use, allowing both experienced and novice users to operate it with minimal training. The device also features an adjustable scanning angle, facilitating efficient scanning in various scenarios.

Another noteworthy characteristic of the GTOCP2 is its durability. Constructed to endure the rigors of everyday use in busy environments, it meets IP54 standards for dust and moisture resistance. This durability ensures that the device remains functional even in challenging conditions, making it a reliable choice for industries that demand tough, resilient equipment.

Power management is another area where the GTOCP2 shines. The device is equipped with a long-lasting rechargeable battery, allowing for extensive usage between charges. This feature is particularly beneficial for on-the-go operations, where downtime can lead to decreased productivity.

In summary, the Socket Mobile GTOCP2 stands out for its exceptional scanning capabilities, strong wireless connectivity, ergonomic design, durability, and efficient power management. It is an excellent investment for businesses looking to improve their operational efficiency and streamline their processes, providing a reliable solution that caters to various industry needs.
Top Page Image Contents