Socket Mobile Series 9 3 | Setup for Windows Mobile

3 | Setup for Windows Mobile

This chapter explains how to install and use the

Cordless Ring Scanner (CRS) with a Bluetooth

enabled Pocket PC or other Windows Mobile-

based device.

Before you begin the instructions in this chapter,

make sure you have charged and installed the

battery as explained in Chapter 2, “Hardware

Preparation.”

STEP 1: Install the software.

STEP 2: Configure scanner settings.

STEP 3: Connect CRS to host device with Bluetooth.

STEP 4: Assemble and put on the CRS.

STEP 5: Scan data into your application.

OPTIONAL:

• Select symbologies.

• Configure prefix/suffixes.

• Configure sound.

• Run Scan Demo.

CHAPTER 3: SETUP FOR WINDOWS MOBILE 15