Uplink |
Figure 3. 100Mbps File server to Hubs Connection
10Mbps Hub to 100Mbps Hub
Plug one end of the Category 5 UTP Cable into one port of the Switch, and the other end of this cable into “Uplink” port of the 100Mbps Fast Ethernet Hub. The cable length between these 2 connecting points should not exceed 100 meters.
Plug one end of the Category 3 UTP Cable into one port of the Switch, and the other end of this cable into “Uplink” port of the 10Mbps Ethernet Hub. The cable length between these 2 connecting points should not exceed 100 meters.
9 |
