OPERATING INSTRUCTIONS
CONTROL PANEL & REMOTE OPERATION
1.Place the heater on a firm, level surface and plug into a grounded 120V 60Hz power outlet. Only operate heater in upright position with caster wheels attached.
2.Turn the heater on by pressing the On/Off button on the control panel or the supplied remote control.
3.Select a heat setting:
On the control panel, press the MODE button to toggle between the two heat settings; LOW (750W) or HIGH (1500W) . When using the remote control press the HIGH or LOW buttons to select the preferred power setting.
4.Adjust the thermostat by pressing the TEMPERATURE SELECT buttons (▲ or ▼) on the control panel or remote control. The digital readout will display the selected temperature.
5.Once you have chosen the desired temperature, the heater will remain on until the room temperature increases to the temperature on the digital display. The heater will cycle on and off to maintain the desired room temperature.
6.This heater is equipped with a
7.The indication lights on the control panel communicate how the heater is operating. The TIMER light will
8.Unplug the heater when not in use.
| Temp./Time |
|
Temperature & Timer |
| Receiver for Remote Control |
Display |
|
|
| Power |
|
| Timer | Timer Select Button |
| Timer | |
|
| |
| Low | Temperature Select Buttons |
Indication Lights |
| |
High |
| |
| Heat | Mode Select Button |
| Mode | |
| ON/OFF | On/Off Button (Power) |
|
| |
| 7 |
|