Specifications |
|
|
Designs & specifications are subject to change without notice. |
| |
|
|
|
|
|
|
Amplifier
Output Power At Stereo operation:
Front channels: | 100 W per channel, min. RMS, driven into 8 Ω, |
| 40 Hz to 20 kHz with no more than 0.8% total |
| harmonic distortion. |
At Surround operation: |
|
Front channels: | 100 W per channel, min. RMS, driven into 8 Ω at 1 kHz with no |
| more than 0.8% total harmonic distortion. |
Center channel: | 100 W, min. RMS, driven into 8 Ω at 1 kHz, with no more than |
| 0.8% total harmonic distortion. |
Rear channels: | 100 W per channel, min. RMS, driven into 8 Ω at 1 kHz, with no |
| more than 0.8% total harmonic distortion. |
Audio |
|
|
Audio Input Sensitivity/Impedance (1 kHz): | DVD, VCR, TV SOUND, CD, TAPE/CDR: | 220 mV/47 k Ω |
Audio Input (DIGITAL IN)* : | Coaxial: DIGITAL 1 (DVD): | 0.5 V |
| Optical: DIGITAL 2 (CD): | |
| * Corresponds to Linear PCM, Dolby Digital, and DTS Digital Surround | |
| (with sampling frequency — 32 kHz, 44.1 kHz, 48 kHz). | |
Audio Output Level: | TAPE/CDR, VCR: | 220 mV |
DVD, VCR, TV SOUND, CD, TAPE/CDR: | 87 dB/78 dB | |
Frequency Response (8 Ω): | DVD, VCR, TV SOUND, CD, TAPE/CDR: | 20 Hz to 20 kHz (±1 dB) |
Tone Control: | Bass (100 Hz): | ±10 dB |
| Treble (10 kHz): | ±10 dB |
Video |
|
|
Video Input Sensitivity/Impedance: |
|
|
Composite video: | VCR, DVD: | 1 V |
Video Output Level/Impedance: |
|
|
Composite video: | VCR, MONITOR OUT: | 1 V |
Synchronization: | Negative |
|
45 dB |
|
FM tuner (IHF)
Tuning Range: | 87.5 MHz to 108.0 MHz |
|
Usable Sensitivity: | Monaural: | 12.8 dBf (1.2 µV/75 Ω) |
50 dB Quieting Sensitivity: | Monaural: | 21.3 dBf (3.2 µV/75 Ω) |
| Stereo: | 41.3 dBf (31.5 µV/75 Ω) |
Monaural: | 78 dB at 85 dBf | |
| Stereo: | 73 dB at 85 dBf |
Total Harmonic Distortion: | Monaural: | 0.4% at 1 kHz |
| Stereo: | 0.6% at 1 kHz |
Stereo Separation at REC OUT: | 35 dB at 1 kHz |
|
Alternate Channel Selectivity: | 45 dB: (±400 kHz) |
|
Frequency Response: | 30 Hz to 15 kHz: (+0.5 dB, |
|
AM tuner
Tuning Range: | 530 kHz to 1 710 kHz |
|
Usable Sensitivity: | Loop antenna | 400 µV/m |
50 dB (100 mV/m) |
|
General
Power Requirements: | AC 120V , 60 Hz |
Power Consumption: | 180 W/230 VA (at operation) |
| 2 W (in standby mode) |
Dimensions (W x H x D): | 435 mm x 146.5 mm x 416 mm (17 3/16 in. x 5 13/16 in. x 16 7/16 in.) |
Mass: | 8.8 kg (19.5 lbs) |
Trouble Shooting / Specifications
31