Troubleshooting

Use this chart to help you solving daily operational problems. If there is any problem you cannot solve, contact your JVC service center.

PROBLEM

POSSIBLE CAUSE

SOLUTION

 

 

 

The power does not turn on.

The power cord is not plugged in.

Plug the power cord into an AC outlet.

No sound from speakers.

Speaker signal cables are not connected.

Check speaker wiring and reconnect if necessary.

The SPEAKERS ON/OFF button is not set correctly.

Press SPEAKERS ON/OFF button correctly.

An incorrect source is selected.

Select the correct source.

 

 

Muting is activated.

Press MUTING to cancel the mute.

An incorrect input mode (analog or digital) is selected.

Select the correct input mode (analog or digital).

Connections are incorrect.

Check connections.

 

For analog connections, see page 6.

 

For digital connections, see page 7.

Sound from one speaker only.

Speaker signal cables are not connected properly.

Check speaker wiring and reconnect if necessary.

 

The balance is set to one extreme.

Adjust the balance properly (see page 15).

 

 

 

Continuous hiss or buzzing during FM

Incoming signal is too weak.

Connect an outdoor FM antenna or contact

reception.

 

your dealer.

 

 

 

 

 

 

The station is too far away.

Select a new station.

 

 

 

 

 

An incorrect antenna is used.

Check with your dealer to be sure you have the

 

 

correct antenna.

 

 

 

 

 

 

Antennas are not connected properly.

Check connections.

 

 

 

 

Occasional cracking noise during FM

Ignition noise from automobiles.

Move the antenna farther from automobile

reception.

 

traffic.

 

 

 

 

 

 

“OVERLOAD” starts flashing on the

Speakers are overloaded because of high

1.

Press STANDBY/ON

on the front

display.

volume.

 

panel to turn off the receiver.

 

 

2.

Stop the playback source.

 

 

 

3.

Turn on the receiver again, and adjust the

 

 

 

volume.

 

Speakers are overloaded because of short circuit of speaker terminals.

Press STANDBY/ON on the front panel, then check the speaker wiring.

If “OVERLOAD” does not disappear, unplug the AC power cord, then plug it back again.

If speaker wiring is not short-circuited, contact your dealer.

“DSP MICON NG” starts flashing on the

The built-in microcomputer is not

Press STANDBY/ON

on the front panel to

display.

functioning correctly.

turn off the receiver. After unplugging the

 

 

power cord, consult your dealer.

 

 

 

 

The STANDBY lamp lights up after

The receiver is overloaded because of a

Press STANDBY/ON

on the front panel to

turning on the power, but soon the

high voltage.

turn off the receiver. After unplugging the

receiver turns off (into standby mode).

 

power cord, consult your dealer.

 

 

 

 

Remote control does not work.

There is an obstruction in front of the

Remove the obstruction.

remote sensor on the receiver.

 

 

 

 

Batteries are weak.

Replace batteries.

 

 

 

Remote control does not work for the source (or other components) you try to operate.

An incorrect remote control operation mode is selected.

Select the correct remote control operation mode (see pages 28 and 29).

30

Page 31 Page 33
Page 32
Image 32
JVC RX-6022VSL manual Troubleshooting, Problem Possible Cause Solution
Page 31 Page 33

RX-6022VSL specifications

The JVC RX-6022VSL is a versatile audio receiver that caters to the demands of both audiophiles and casual listeners. Renowned for its blend of performance, functionality, and aesthetic appeal, the RX-6022VSL has become a favored choice for home theater setups and music enthusiasts alike.

One of the standout features of the RX-6022VSL is its comprehensive support for various audio formats. It offers multiple audio inputs including digital coaxial and optical connections, allowing users to connect a range of devices, from CD players to gaming consoles. This flexibility ensures that all audio sources can be integrated seamlessly into one system.

The RX-6022VSL is equipped with a robust 5.1-channel surround sound capability, supporting Dolby Digital and DTS decoding. This immersive audio experience allows users to enjoy their favorite movies and music with rich, dynamic sound, making it an essential addition to any home theater. The receiver delivers high-powered output with a total power of 100 watts per channel, ensuring that even large rooms can be filled with crisp and powerful audio.

In addition to traditional audio capabilities, the RX-6022VSL features advanced technologies that enhance the listening experience. The inclusion of a built-in AM/FM tuner allows users to access their favorite radio stations easily. Furthermore, the receiver supports various sound enhancement features, such as tone control and balance adjustment, enabling users to customize their audio experience to suit personal preferences.

The user-friendly interface of the RX-6022VSL is designed for ease of use. A dual-front display provides quick access to controls, while an intuitive remote control allows for convenient operation from a distance. Additionally, the receiver is equipped with an easy-to-use setup wizard that guides users through the initial configuration process, ensuring a hassle-free installation.

Design-wise, the JVC RX-6022VSL boasts a sleek and modern aesthetic, making it a stylish addition to any entertainment center. With an elegant black finish and well-organized front panel, it not only performs well but also complements the decor of any living space.

Overall, the JVC RX-6022VSL is a powerful and adaptable audio receiver that combines essential features with advanced technology. Its ability to provide high-quality sound, multiple connectivity options, and user-friendly design makes it a valuable choice for anyone looking to elevate their audio experience at home.
Top Page Image Contents