Using DAP Modes and All Channel Stereo
Once you have adjusted the DAP modes and All Channel Stereo, the adjustment is memorized for each source.
•You cannot use the DAP modes and All Channel Stereo if no rear speakers are connected and activated.
•You cannot adjust the effect level for All Channel Stereo.
From the remote control:
It will be convenient for you to use the remote control for adjustments, since you can make adjustments from your listening point.
1Start playing 2 channel
2 Press SURROUND ON/OFF to activate | ON/OFF |
Surround mode. | SURROUND |
|
When Surround mode turns on, the last selected Surround mode will be activated.
•Each time you press the button, Surround mode turns on and off alternately.
3 Press SURROUND MODE repeatedly SURROUND
until one of the DAP | MODE |
CLUB,” “DANCE CLUB,” “HALL,” |
|
| |
appears on the display. |
|
The DSP indicator also lights up on the display.
If you like to adjust sound, go to step 4.
When Surround mode turns on, the last selected Surround mode will be activated.
•Each time you press the button, Surround mode turns on and off alternately.
3 Press SURROUND MODE
repeatedly until one of the DAP
CLUB,” “HALL,” “PAVILION,”—
or “ALL CH STEREO” appears on the display.
The DSP indicator also lights up on the display.
If you like to adjust sound, go to step 4.
4Adjust the speaker output levels.
1) Press ADJUST repeatedly until one | ADJUST |
| |
of the following indications (with the |
|
current setting)* appears on the |
|
display. |
|
REAR L : To adjust the left rear speaker output level
REAR R : To adjust the right rear speaker output level
CENTER : For “ALL CH STEREO”
*“0” is the initial setting. If you have already changed the setting, another number (level) will be shown.
Creating Realistic Sound Fields
4 Press SOUND. | SOUND |
|
2) Press CONTROL UP 5/DOWN ∞ |
to adjust the selected speaker |
CONTROL
DOWN UP
10 keys are activated for sound adjustments.
5Adjust the speakers output levels
•To adjust the left rear speaker level, press REAR•L
•To adjust the right rear speaker level, press REAR•R
For “ALL CH STEREO” only:
•To adjust the center speaker level, press CENTER
REAR
L 
5 6
REAR
R 
8 9
CENTER 
2 3
output levels. |
3) Repeat steps 1) and 2) to adjust the |
other speaker levels. |
5Only for DAP modes: Adjust the DSP effect level.
1)Press ADJUST repeatedly until “EFFECT” (with the current setting)* appears on the display.
ADJUST
6For DAP modes only:
Press EFFECT to select the effect level (1 to 5) you want.
•Each time you press the button, the effect level changes as follows:
EFFECT
4
*“EFFECT 3” is the initial setting. If you have already changed the setting, another setting will be shown.
2) Press CONTROL UP 5/DOWN ∞ | DOWN UP |
| CONTROL |
to select the effect level (1 to 5) you |
|
want.
EFFECT 1 |
|
| EFFECT 2 |
|
| EFFECT 3 |
|
| |||||
EFFECT 5 |
| EFFECT 4 | ||||
As the number increases, the selected mode becomes stronger (normally set it to “EFFECT 3”).
On the front panel:
1Start playing 2 channel
2 Press SURROUND ON/OFF to | SURROUND ON/OFF |
| |
activate Surround mode. |
|
•Each time you press the button, the effect level changes as follows:
EFFECT 1 
EFFECT 2 
EFFECT 3
EFFECT 5 |
| EFFECT 4 |
|
As the number increases, the selected mode becomes stronger (normally set it to “EFFECT 3”).
Note:
You cannot select any DAP mode and All Channel Stereo for Dolby
Digital and DTS Digital Surround.
To cancel DAP modes and All Channel Stereo
Press SURROUND ON/OFF so that “SURROUND OFF” appears on the display. The DSP indicator goes off.
23
