Using DVD MULTI Playback Mode

This receiver provides DVD MULTI Playback Mode for reproducing the analog discrete output mode of the DVD player. Before playing back a DVD, refer also to the manual supplied with your DVD player.

From the remote control:

1 Press DVD MULTI.

Note:

DVD MULTI

Activating DVD MULTI Playback Mode

You can adjust DVD MULTI Playback Mode while playing back a DVD with analog discrete output mode on a DVD player.

Once you have made adjustments, the receiver memorizes the adjustments until you change them.

You also need to set the DVD player to the analog discrete output mode.

Before you start, remember...

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 3 again.

On the front panel:

1 Press DVD MULTI.

DVD MULTI

When you select “DVD MULTI” as the source to play, Surround mode is canceled, and the SURROUND ON/OFF and SURROUND MODE buttons do not work.

2Select the analog discrete output mode on the DVD player, and start playing a DVD.

• Refer to the manual supplied with the DVD player.

If you need to make any adjustment, go to the following steps.

3 Press SOUND.

SOUND

10 keys are activated for adjusting the sound.

4Adjust the speaker output levels.

Note:

When you select “DVD MULTI” as the source to play, Surround mode is canceled, and the SURROUND ON/OFF and SURROUND MODE buttons do not work.

2Select the analog discrete output mode on the DVD player, and start playing a DVD.

• Refer also to the manual supplied with the DVD player.

If you need to make any adjustment, go to the following steps.

3Adjust the speaker output levels.

1) Press ADJUST repeatedly until one			ADJUST
	of the following indications appears



	on the display.

	CENTER	: To adjust the center speaker level.

	REAR L	: To adjust the left rear speaker level.

	REAR R	: To adjust the right rear speaker level.