Using the radio in scan mode
xx You cannot transmit while in scan mode.
xx You must have two or more channels in memory to start a scan.
xx To save a channel into memory, select the channel, then press and hold
xx To remove a channel from memory, set the radio to that channel, then press and hold WX- MEM for two seconds. Memory will no longer show on the display.
xx To activate scan mode, press and hold
xx When the radio automatically stops on a channel, press CHANNEL UP to leave that channel and resume scanning.
xx To end the scan, press the microphone’s PUSH TO TALK,
Scan mode with Weather Alert Watch
If you activate Weather Alert Watch while operating in scan mode, the radio checks the most
every seven seconds, then continues scanning the next channel in memory.
To turn Weather Alert Watch on
or off, press and hold
Scan mode with Triple and Dual Watch
If you activate Triple Watch while operating in scan mode, the radio checks channels 16 and
9 every two seconds, then goes on to scan the next channel; with
Dual Watch turned on, the radio 08 10 only checks channel 16.
Memory Channel Scan
11 1213 14 15 17 20 24 25
Press and hold
between Triple or Dual Watch, see page 18.)
09 16
Triple Watch : Every 2 seconds, the radio checks channels 9 & 16 then goes on to the next channel.
Press and hold the
mode.
Scan mode with both Weather Alert and Triple/Dual Watch
You can activate Weather Alert Watch and Triple/Dual Watch at the same time. The radio performs both checks at their scheduled time.
Memory Channel Scan
08 10 11 1213 14 15 17 20 24 25
Triple Watch: |
|
|
|
|
| WX Alert : Every 7 |
|
|
|
|
Every 2 seconds, |
|
|
|
|
| seconds, the radio |
|
|
|
|
the radio checks |
|
|
|
|
| checks the |
|
|
| wx |
channels 9 & 16 |
|
|
|
|
| weather channel, |
|
|
| |
09 |
| 16 |
|
|
|
|
| |||
then goes on to |
|
| then scans the next |
|
|
|
| |||
|
|
|
|
|
| |||||
the next channel. |
|
|
|
|
| channel. |
|
|
|
|
14