Vidikron VP-42, VP-60, VP-50 To set the RGB select mode to “AUTO”, OSD On Screen Display Controls

OSD (On Screen Display) Controls

Checking the signal being transmitted to RGB1 terminal Use this to confirm the signal being transmitted to the RGB1 terminal.

It is set to RGB and can not be adjusted.

SETTING 1

OSD
BNC INPUT	:		COMP
D-SUB TYPE		:	RGB
RGB TYPE	:		AUTO
HD TYPE	:		1080B
INPUT SKIP	:		OFF
FACTORY	:		OFF
NEXT PAGE
SEL.	ADJ.		EXIT EXIT

Setting a computer image to the correct RGB select screen With the computer image, select the RGB Select mode for a moving image such as (video) mode, wide mode or digital broadcast.

Example: Setting the “RGB TYPE” mode to “AUTO”

Press the MENU button on the remote control to display the

MAIN MENU on the screen, then...

1.Use the and buttons to select “SETTING 1”, then press the MENU button. The “SETTING 1” menu appears.

2.Use the and buttons to select “RGB TYPE”.

46

3.To set the RGB select mode to “AUTO”...

Use the and buttons to select “AUTO”. The mode switches as follows each time the or button is pressed:

AUTO STILL MOTION RESIZE1 RESIZE2 DTV

SETTING 1

OSD
BNC INPUT	:		COMP
D-SUB TYPE	:		RGB
RGB TYPE		:	AUTO
HD TYPE	:		1080B
INPUT SKIP	:		OFF
FACTORY	:		OFF
NEXT PAGE
SEL.	ADJ.		EXIT EXIT

4.Once the setting is completed...

Press the EXIT button to return to the main menu.

To delete the main menu, press the EXIT button once more.

Information

■RGB TYPE modes

One of these 6 modes must be selected in order to display the following signals correctly.

AUTO:	Select the suitable mode for the specifications of input
	signals as listed in the table “Computer input signals
	supported by this system” on page 106.
STILL:	To display VESA standard signals. (Use this mode for
	a still image from a computer.)
	continued on next page ...